Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Irving
A sagging gate or a dead opener in Irving usually comes down to two things: the black-clay soil has shifted a hinge post, or a slide-gate operator has drifted out of alignment on a Las Colinas community entrance. We fix both, usually the same day we hear from you. Hal Gatewood started this shop in 2001, and we’ve been welding, realigning, and rebuilding gates across Irving ever since. If your gate won’t close, drags on the ground, or trips its safety photocell every other morning, call (903) 829-4499. A live person answers.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Repair Company
The name is on the shop, and the shop is down the road. Hal Gatewood has been fixing gates since 2001, and he still shows up on Irving jobs himself. When a Las Colinas HOA calls about a slide gate that’s locked out a dozen residents at the MacArthur Boulevard entrance, the person who picks up the phone is the same person who will be under the control box an hour later.
We carry a published license number and a physical address anyone can look up. That matters in Irving, where a lot of gate work is managed by property managers who need a vendor they can rely on without chasing down a subcontractor. Reviews from Irving customers mention that we show up in the window we promise, quote the price before we touch the gate, and don’t swap parts that still have life in them.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no fine print.
Our Gate Repair Services in Irving
We work on residential driveway gates in North Irving, ornamental iron entrances in Las Colinas, and the commercial-grade slide systems that guard apartment complexes and office campuses along SH-114. Here’s what we handle most often in Irving.
Electric Gate Repair
Electric gates in Irving don’t just open and close; they integrate with keypads, card readers, intercoms, and the occasional municipal safety requirement. When an opener fails on an HOA entrance, the board wants it fixed yesterday, and the residents want it fixed yesterday too. We troubleshoot motors, control boards, loop detectors, and remote receivers. We service LiftMaster, DoorKing, Elite, and Mighty Mule among others, and we keep common boards and receivers on hand so a Las Colinas gate isn’t down for a week waiting on a part.
Automatic Gate Repair
An automatic gate that starts and stops mid-cycle, reverses for no reason, or sits dead with a flashing error light is usually trying to tell you something. In Irving, we see a pattern that’s different from neighboring towns. The soil settles, the post leans, the rail binds, and the motor burns itself out trying to push steel that no longer lines up. We fix the mechanical alignment before we replace the motor, so you’re not paying twice. If a new motor is what the gate needs, we quote it before we order it.
Hinge & Post Repair
North Texas black clay doesn’t stay put. It swells when it rains and shrinks when it’s dry, and over a few seasons a gate post can lean far enough to make the gate drag. We reset posts with proper concrete footings, weld cracked hinge barrels, and shim gates back to plumb. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate that scrapes the driveway or refuses to seat in the latch has almost always drifted out of alignment. Sometimes it’s the post, sometimes it’s the hinge, and sometimes it’s the rack-and-pinion on a slide gate. We square the frame, adjust the gap at the latch, and set the travel limits on the opener so the gate closes clean without overrunning. Realignment is often the difference between a gate that works and one that wears itself out in six months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We’re certified to service nine major gate brands, including LiftMaster, DoorKing, and Elite. When a LiftMaster slide operator on a Las Colinas property shows a fault we can’t clear by resetting limits, we know which board revision it is before we open the panel, because we’ve seen the same failure pattern on a dozen other Irving entrances. That brand familiarity means faster diagnosis and fewer return trips. We stock parts locally, not in a warehouse three states away, and we can usually have a gate running the same day we look at it.
Common Gate Repair Problems We See in Irving Homes
- Hinge posts heaving out of plumb from black-clay soil. Irving’s expansive clay swells after rain and shrinks in the summer heat. The post moves, the gate drags, and the hinges start to bind. We reset the post and correct the gate alignment in one visit.
- Slide-gate rack-and-pinion drift on Las Colinas entrances. When the post shifts, the rack moves with it, the pinion gear chews on the rails, and the gate jams mid-travel. We see this on commercial entrances along SH-114 and MacArthur Boulevard all year long.
- Rust and pitting on ornamental iron near the Mandalay Canal. The water features create a microclimate with more moisture than the flatland neighborhoods a few miles west. Scrollwork near the canal corrodes faster, and we do weld repair and repainting there more often than anywhere else in Irving.
- Safety photocell tripping on shared community gates. A gate that won’t close because the photocell sees a phantom obstruction is usually a misaligned rail or a loose reflector post. We correct the mechanical drift first; if the sensor itself is bad, we replace it with a compatible unit and retest the entrapment force.
Pricing for Gate Repair in Irving, TX
A hinge and post reset on a residential swing gate in Irving typically runs $225 to $475 depending on whether the post footing needs to be re-poured. Gate realignment on the same gate usually falls between $150 and $350. Slide-gate rack-and-pinion correction on a Las Colinas community entrance starts around $500 and can run to $1,200 for a full post excavation with new concrete. Weld and rust repair on ornamental iron averages $200 to $600 depending on how much scrollwork needs cutting and replacing. The price is quoted and agreed before any work starts, and you’ll see it in writing. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for an exact quote, estimates are free.
Key Takeaways
- Hal Gatewood has been fixing gates across Irving since 2001 and still runs every call himself.
- Las Colinas and the SH-114 corridor skew toward commercial slide-gate operators and HOA access systems.
- Black-clay soil heave means hinge posts and slide racks need attention every few seasons.
- Every repair carries the 90-Day Done Right Promise in writing.
- Free estimates, upfront pricing, and a live person answers the phone 24 hours a day.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Irving
Most Las Colinas HOAs and property managers want a written quote with the scope of work, the brand of any replacement parts, and a projected completion window before they approve the job. Some also require architectural approval if you’re changing the gate’s style, height, or finish. We’ve worked with dozens of Irving property managers, and we’re used to coordinating the paperwork, the access schedule, and the final walkthrough. If your HOA needs documentation, we’ll provide it in writing before we begin. Call (903) 829-4499 and we’ll help you get the approval moving.
The most common cause in Irving is a hinge post that has heaved out of plumb after rain, dragging the latch-side corner into the driveway. The soil under the post swells, the post leans, and the gate binds. We check the post first, because a new opener won’t fix a leaning post. In many Irving homes built between the 1950s and 1970s, the original post wasn’t set in a footing deep enough for our expansive clay. We reset the post, realign the gate, and the opener usually recovers on its own. Call (903) 829-4499 for an inspection and a written quote.
Yes. Many Irving communities, especially in Las Colinas and along MacArthur Boulevard, run shared entry systems with card readers, intercoms, and visitor access codes integrated into the gate operator. We can troubleshoot the operator without disturbing the access-control wiring, and if the HOA’s control system needs a specific header or relay, we’ll coordinate with their system vendor. We service DoorKing, LiftMaster, Elite, and other brands commonly found on Irving HOA entrances. Call (903) 829-4499 and tell us what system you’re running.
The Mandalay Canal and the water features in Las Colinas create localized humidity that accelerates rust on ornamental iron. Scrollwork and hidden welds near the water pit and flake noticeably faster than gates in the drier flatland neighborhoods west of MacArthur. We cut out corroded iron, weld in fresh stock, and repaint with a rust-inhibitive primer before the finish coat. On Las Colinas gate jobs, rust repair is a routine part of the job, not an add-on. Call (903) 829-4499 for a free second opinion if a written estimate says “replace.”
The photocell almost always has a reason. On Irving slide gates, the most common cause is rack-and-pinion drift. The post moves, the rack shifts, the gate shudders as it travels, and the entrapment sensor reads that vibration as an obstacle. We check the gate’s mechanical alignment before replacing the sensor. If the post has moved, resetting it usually clears the issue. If the sensor is genuinely bad, we replace it and retest entrapment force to the manufacturer’s spec. Call (903) 829-4499 for a diagnosis; we’ll quote the fix before we touch the gate.
We Also Serve Cities Near Irving
Beyond Irving, our crews serve Gate Repair customers in Coppell, Euless, Plano, and Grapevine. Same company, same 90-day promise, and the same owner-operated crews. If you’re in a neighboring city and your gate is down, call us before you decide it needs replacing. For more on what we do across the area, see Gate Repair in Irving.
If your gate is dragging, jammed, or completely dead, call (903) 829-4499. We answer live, 24 hours a day, seven days a week. Free estimates, upfront pricing, and a 90-day promise in writing on every job we do in Irving.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving since 2001.