Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Grapevine
Gate repair in Grapevine usually means one of two things: a hinge post that’s leaning out of plumb on Blackland Prairie clay, or an operator that’s been run far past what it was built for. We fix both, usually the same day. Hal Gatewood has been repairing gates since 2001, and the person who shows up at your gate in Grapevine is the same person whose name is on the invoice. Call (903) 829-4499 and a live person picks up. No voicemail, no queue.
Most Grapevine gate problems start in the ground, not in the motor. The clay under this part of North Texas swells when it rains and shrinks when it doesn’t, and your gate post rides that movement like a slow-motion see-saw. A gate that won’t latch, a panel that scrapes the driveway, an operator that grinds and trips its breaker: those are almost always post problems before they’re motor problems. That’s where we start, because fixing the panel without the post means fixing it twice. If you’re in Grapevine and your gate is acting up, call (903) 829-4499 for a free estimate. We quote the price before any work starts, and that’s the price you pay.
Why Gatewood Fence & Gate Is Grapevine’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop, his address is published, and his phone number is answered by a person, not a routing tree. You can drive to the shop and look him in the eye. That’s the oldest accountability there is, and it’s rare enough that people in Grapevine mention it, because a lot of them have been burned by companies that quote one number on the phone and hand them a different invoice at the driveway. Hal has been at this since 2001. He has fixed gates on Historic Main Street, in the lake-view neighborhoods off Fairway Drive, and along the resort corridor near Gaylord Texan Drive.
Every job at Grapevine carries the 90-Day Done Right Promise, stamped in writing. If it’s not done right, one call brings us back, no runaround and no second billing. We’re licensed and insured, background-checked, and we weld on site so your gate stays in your driveway while it’s being repaired, instead of disappearing on a truck for three weeks.
We answer the phone around the clock. If your gate fails at 11 p.m. and you can’t get your car out for work the next morning, you talk to a human at midnight, not a call center three states away. That matters in a town like Grapevine, where people know the difference.
Our Gate Repair Services in Grapevine
Electric Gate Repair
Electric gates in Grapevine work harder than most people realize. Operators that were installed for a family coming and going a dozen times a day are now running 30, 40, 50 cycles daily at vacation rentals near the lake. That’s commercial duty on residential equipment, and it burns out motors, capacitors, and control boards years ahead of schedule. When we do Gate Repair on an electric gate, we check the operator against the actual cycle count it’s handling, not the number on the box. If the gate needs a commercial-rated unit, we’ll tell you plainly and explain why, rather than swapping in another residential board that’ll fail again before its warranty is half gone.
Automatic Gate Repair
An automatic gate that opens on its own, or won’t respond to the keypad, or reverses before it closes fully: all of these are symptoms with specific causes. We trace them. Keypad entry systems on vacation rentals near Gaylord Texan Drive fail when sprinkler overspray wicks into conduit joints and shorts the wiring, leaving guests locked out at check-in. We’ve rewired those, sealed the conduit properly, and set the gate up so it stops failing every time the lawn gets watered. Automatic gate repair in Grapevine is our bread and butter, and we stock parts for the brands most common on lake-view and resort-corridor properties.
Hinge & Post Repair
Here’s the thing about Grapevine clay: it doesn’t settle evenly. It heaves. A post set in that clay will move with every wet-dry cycle, and once it’s leaning two or three degrees out of plumb, the gate hangs heavy on the latch side, the hinges bind, and the operator starts eating its own gears trying to force it. We reset posts, pour new footings where the soil movement demands it, and re-hang the gate so it swings square. Hinge and post repair is the most common call we get from older Ranch-style homes in interior Grapevine neighborhoods, where gates and posts installed in the 1990s are now hitting the end of their original footing life.
Gate Realignment
A sagging gate on a heavy ornamental iron panel is rarely a hinge problem and never a middle-of-the-panel problem. It’s almost always the post, or the frame, or a weld that’s stretched. A gate sags in the hinge post, not in the middle, and that’s where we start. We realign gates in place, re-weld stretched joints, and in many cases we reinforce the hinge side so it doesn’t start sagging again in six months. If you’ve got a double-swing iron gate on a lake-view property and one panel has dropped enough to drag the driveway, that’s exactly the kind of repair we do most often in Grapevine.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Grapevine, we see a lot of Viking and DoorKing operators on older lake-view installations, and plenty of Ghost Controls units on newer subdivision gates. We stock common parts for all of them, so turnaround on motor swaps and board replacements is fast, often same-visit. If your gate has a brand stamped on it and the last company told you they’d have to order a part and come back in two weeks, call us instead. We probably have it on the truck.
Common Gate Repair Problems We See in Grapevine Homes
- Heaved hinge posts from Blackland Prairie clay. The soil under Grapevine expands and contracts through wet and dry seasons, and gate posts ride that movement. A post that’s drifted out of plumb binds the gate at the latch side, and the operator strains until something fails. We reset and re-foot the post so it stays put.
- Residential operators run to death on resort duty cycles. Properties along the Lake Grapevine resort corridor and near Gaylord Texan Drive routinely cycle their gates 40-plus times a day. Residential operators are rated for maybe 15. Motors and capacitors burn out every four to six years here, and the correct fix is usually a commercial-rated unit, not another board swap.
- Sprinkler overspray shorting keypad conduit. Vacation rentals near the lake water their landscaping constantly, and the overspray finds its way into conduit joints at ground level. The keypad goes dead, guests can’t get in, and the gate defaults to manual. We re-route, seal, and replace the damaged wiring.
- Worn hinges and stretched welds on heavy iron gates. Gates in the lake-view subdivisions around Lake Grapevine are often ornamental wrought iron or powder-coated steel, and they weigh hundreds of pounds. Hinges wallow out, welds stretch, and the panel sags gradually until it scrapes. We weld on site and re-hang the gate same day.
Pricing for Gate Repair in Grapevine, TX
A typical electric gate repair in Grapevine runs $180 to $340 when it’s a board, capacitor, or limit switch replacement. Hinge and post work generally starts around $275 and can reach $900 or more if the post needs re-footing in unstable clay, which happens more often near the lake shoreline. Operator replacement, especially when a residential unit needs upgrading to commercial duty, typically runs $950 to $1,800 installed, depending on the gate’s width and weight. Every quote is fixed before we start work, and we honor it. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 and we’ll give you a real number, not a range that changes at the door.
We Also Serve Cities Near Grapevine
If your property sits just outside Grapevine, we serve Southlake, Colleyville, Euless, and Coppell with the same 90-Day Done Right Promise and same-day response. HOA-governed subdivisions in Southlake and Colleyville have their own gate quirks, and we know them well, but the clay and the heat don’t care about city lines. Call (903) 829-4499 from anywhere in the Grapevine area and talk to a live person now.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Grapevine
The clay under Grapevine expands and contracts through every wet-dry cycle, and a gate post set in it will heave and lean until the gate binds and the operator fails. The repair isn’t just pushing the post straight and adding concrete; the footing has to be re-dug, and in many Grapevine yards that means going deeper than the original 1990s install ever did. We reset the post with proper drainage and re-hang the gate so it swings square, then verify the operator isn’t already damaged from fighting the bind. Call (903) 829-4499 for an exact quote on your gate.
Yes. For long driveway gates where running mains power is impractical or would mean trenching through mature landscaping, we convert the operator to solar charging with battery storage sized to the gate’s actual usage. In Grapevine’s summer heat, we spec the battery bank for the higher discharge rates that 100-degree days bring, so the gate doesn’t die in August. Solar conversions start with a free site visit and a written price before any work begins.
It’s normal for a residential-class operator being run at commercial cycle counts, which is exactly what happens on the resort corridor near Gaylord Texan Drive. A residential slide or swing operator is typically rated for 15 to 20 cycles per day, and vacation rental traffic runs 30 to 50. The fix is not another residential board. We replaced a LiftMaster residential swing operator on a vacation rental off Gaylord Texan Drive after its control board gave out barely six years in; our tech pulled the old operator, upsized the post footing, and installed a Viking commercial-duty unit with a safety photocell loop. Now it runs quiet even when the place turns over three times a week. Call (903) 829-4499 and we’ll assess your gate’s actual cycle count and recommend the right operator for the load.
We start at the hinge post, because a heavy iron gate sags in the post, not in the panel. The hinges wallow out, the post drifts off plumb on the clay, and the gate drags. We re-foot or brace the post, replace worn hinge hardware, and weld any stretched joints on site. That keeps the panel moving square and the operator from burning out trying to push a gate that’s fighting its own weight. Most hinge-side sag repairs in Grapevine are done in one visit.
Yes. UL 325 requires entrapment protection on all automated gate operators, including private driveway gates in HOA communities around Lake Grapevine. Photo eyes, reverse sensors, and proper warning signage all apply. Many older gates we inspect in Grapevine’s lake-view subdivisions were installed before current standards, and we bring them up to compliance during the repair. Call (903) 829-4499 and we’ll inspect your gate at no charge as part of the estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grapevine with on-site welding and the 90-Day Done Right Promise since 2001.