Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Irving
Gate parts and welding work in Irving often comes down to one thing: the soil under the post. The same expansive black-clay that shifts foundations across Dallas County also heaves gate posts out of plumb, and that means hinges bind, rollers drag, and welds crack under stress they were never designed to take. If you’re in Irving and your gate sags, scrapes the driveway, or won’t latch, the fix usually starts at the post, not the panel. Call (903) 829-4499 and Hal will walk you through what he’s seeing before he ever sets foot in the truck.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and he still answers his own phone. That matters in Irving, where a lot of the work isn’t a simple residential swing gate but commercial-grade slide operators along the SH-114 corridor and HOA entrance systems in Las Colinas. A homeowner near Northgate Drive doesn’t need a dispatcher three states away; they need someone who knows what clay soil does to a hinge post on Valley View Lane. Our Gate Parts & Welding team shows up with the right steel, the right rods, and a welder in the truck, and the person who quotes the job is the person who does the job.
We publish our address, our license number, and Hal’s name is on every invoice. Irving customers call us because they’ve been burned by a national outfit that quoted one number over the phone and a different one at the door. We quote the price upfront, in writing, and we stand behind it. The 90-Day Done Right Promise isn’t fine print; it’s stamped on the paperwork. If it’s not right, Hal comes back. One call does it.
Our Gate Parts & Welding Services in Irving
Here’s what we actually do in Irving, from the hinge post out. Every job starts with the same question: is the post still solid? Fix the panel without the post and you’ll fix it twice.
Hinge Replacement
In Irving’s 1950s and 1970s tract subdivisions, we see hinge failures from two directions: rust on ungalvanized hardware and stress from posts that have shifted with soil movement. We cut out the old hinge, weld in new structural hinges sized to the gate weight, and plate the post if it’s still sound. If the post has moved, a new hinge won’t hold; we address both. Hinge replacement on a standard residential gate in Irving typically runs $120-$280 per gate, including hardware and welding, depending on gate weight and access.
Post Replacement
This is the biggest one for Irving, especially near Las Colinas. Black-clay soil expands and contracts with moisture, and a post set in a shallow footing will heave out of plumb inside a few seasons. We dig out the old footing, pour a deeper concrete base, set the new post square, and weld the gate back to it. On HOA slide gates along MacArthur Boulevard, we routinely replace posts that have racked the entire gate frame out of square. Post replacement in Irving generally runs $250-$650 per post, including concrete and welding, with the range driven by gate size, soil access, and whether we’re reusing the existing gate panel.
Rail Repair
Rails take abuse on wide gates, especially slide gates where the rack and pinion sees daily cycling. We weld cracked rails, reinforce sagging top rails, and rebuild rack teeth that have worn or stripped. On older ornamental iron gates in North Irving, decorative rail sections often crack at the original weld points, and we grind, re-weld, and repaint to match. A typical rail repair on an Irving residential gate runs $150-$350, while commercial slide gate rail rebuilds start around $400 depending on length and access.
Custom Welding
Sometimes the part doesn’t exist anymore. We fabricate gate brackets, reinforce hinge plates, weld gussets onto rack mounts, and build custom latch assemblies for gates that were installed before anyone kept parts catalogs. We also do aesthetic weld repair on ornamental scrollwork, which matters in Las Colinas where the canal humidity pits iron faster than anywhere else in the city. Custom welding in Irving runs $90-$150 per hour plus materials, and we quote a firm number before the first arc is struck.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We’re certified to work on nine major gate brands, and in Irving we see a lot of Viking and DoorKing operators on HOA and corporate gates, plus Ghost Controls on residential solar installs. If you’ve got a slide gate operator that’s grinding, a board that won’t respond, or a remote that works when it wants to, we keep common parts stocked and can order OEM replacements quickly. We service what’s already on your gate; we don’t push you toward a full replacement unless the unit is truly dead, and we’ll show you exactly why before we recommend it.
Common Gate Parts & Welding Problems We See in Irving Homes
- Post heave from black-clay soil. Irving’s expansive clay is brutal on gate posts. As soil moisture swings between summer drought and seasonal rains, posts lean, and a leaning post drags the gate out of alignment, shreds rollers, and cracks weld joints. This is the single most common repair call we take in Irving, even on gates installed just a few years ago.
- Rust and pitting near the Mandalay Canal. Water features in Las Colinas raise localized humidity around ornamental iron gates. Scrollwork that would last decades in a drier part of Irving starts pitting in five to seven years near the canal. We treat the oxidation, weld-patch any thinned sections, and repaint to match the existing finish.
- Rack and pinion wear on HOA slide gates. Along the SH-114/MacArthur corridor, community entrance gates cycle dozens or hundreds of times daily. Rack teeth wear smooth, pinions slip, and the gate jerks or stops mid-cycle. We rebuild rack sections and realign pinion drives on site, which keeps the gate in service instead of out of commission waiting on a full panel replacement.
- Undersized post footings on rural acreage gates. Long driveways and wide farm gates on the edges of Irving often have solar openers and panels that were installed with shallow footings and light bracing. The first strong windstorm or soil shift twists the panel, and the rack and pinion loses alignment. Deep footings and gusseted post reinforcement stop the cycle.
Pricing for Gate Parts & Welding in Irving, TX
Here are honest numbers for the Irving market. Hinge replacement runs $120-$280 per gate. Post replacement runs $250-$650 per post. Rail repair runs $150-$350 for residential gates, and commercial slide gate rebuilds start around $400. Custom welding runs $90-$150 per hour plus materials. Factors that move the price: gate weight (a heavy ornamental iron gate takes more weld and more care than a light tubular aluminum), soil conditions at the post, whether we’re working on a sloped driveway, and how much rust repair is needed before the weld. The price we quote is the price you pay; we agree on it in writing before any work starts. Call (903) 829-4499 for a free estimate, and remember: no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Irving
We take gate parts and welding calls across the metro area, including Coppell, Euless, Plano, and Grapevine. If you’re in an adjacent city and your gate has stopped latching or your slide operator is grinding, the process is the same: call, describe the problem, and we’ll get you on the schedule. Learn more about our Gate Parts & Welding in Irving work or just pick up the phone and ask for Hal.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Irving
Black-clay soil in Las Colinas expands heavily when wet and contracts when dry, which pushes gate posts out of plumb over time, causing gates to sag, bind, and scrape the driveway. We set replacement post footings deeper than the original, with wider concrete bases, so the post has mass and embedment to resist the heave cycle. Call (903) 829-4499 if your gate is starting to drag; catching a leaning post early usually means a $250-$300 reset instead of a full post and panel replacement.
The canal and its surrounding water features keep the air consistently more humid in that part of Las Colinas, and that moisture accelerates oxidation on iron scrollwork, pitting, and thinning the metal years before you’d see the same damage in North Irving. We grind out the rust, weld-patch any thinned sections, treat the surface, and repaint to match, and we’ve done enough of this work near the canal to know what lasts and what doesn’t. Call (903) 829-4499 for an honest assessment of whether your gate needs treatment or welding.
Yes, and we do it regularly on acreage properties on the Irving outskirts where running line power to the gate would cost more than the opener itself. We recommend a properly sized panel and battery bank matched to the gate weight and daily cycle count, and we weld or reinforce the post so the operator doesn’t torque it out of plumb. Solar openers work fine on wide gates as long as the panel bracing is right and the post footings are deep; that’s where we’ve seen most self-installed systems fail. Call (903) 829-4499 and we’ll spec it correctly from the start.
Rack and pinion wear is the most common weld repair on HOA and corporate slide gates along SH-114, because those gates cycle constantly and the rack teeth eventually wear smooth or strip, causing the gate to jerk or stall mid-cycle. We rebuild the rack section in place, realign the pinion, and reinforce the rack mounts so the repair outlasts the original installation. If your community gate is grinding or stalling, call (903) 829-4499 for a free estimate and we’ll tell you exactly what’s worn and why.
Yes, we replace latch and lock hardware on older tract home gates all over Irving’s 1950s-1970s neighborhoods, including the magnetic locks, spring latches, and manual slide bolts those gates typically used. We can also retrofit a modern keypad or electronic latch onto an older ornamental gate without replacing the gate itself. Call (903) 829-4499 and describe what you’ve got; Hal will tell you whether it’s a simple parts swap or a weld-in job before we schedule anything.
If your gate in Irving is sagging, stuck, rusted, or just not closing the way it should, call (903) 829-4499. Hal will answer, ask the right questions, and give you a straight answer about what it’ll take to fix it. The name is on the shop, and the shop is a short drive from your driveway. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving and the surrounding area since 2001.