Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Richland Hills
No one in North Richland Hills should have to nurse a sagging gate back and forth by hand for another month. If the hinge post has heaved out of plumb, no amount of adjusting the latch will fix it. A gate sags in the hinge post, not in the middle. That’s where we start on every Gate Installation - North Richland Hills call, and it’s why we do the welding on site in your driveway instead of hauling the gate off to some shop. Call (903) 829-4499 and a live person answers, day or night.
Hal Gatewood has owned Gatewood Fence & Gate since 2001. He grew up around this trade, and his name is on the shop. When you call about a stripped rack and pinion on a 1990s Viking slide operator off Davis Boulevard, or a driveway gate that scrape-groans against its post every morning, the person you’ll talk to knows exactly what North Richland Hills clay does to a gate over three or four seasons.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Parts & Welding Company
North Richland Hills is its own place. The brick ranch homes and two-story tract houses built between the mid-1970s and early 2000s came with ornamental iron driveway gates, and a lot of those gates now run on LiftMaster and Viking operators that are reaching end of life at the same time. You don’t need someone who “does gates” sometimes. You need a shop that has seen the same failure on a dozen streets just like yours. That’s us.
Every job gets the 90-Day Done Right Promise, in writing. Not hidden in the fine print. If it’s not done right, one call brings Hal back. There is no dispatch queue and no voicemail. A live person answers the phone at (903) 829-4499 every hour of the day. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
We also keep the pricing honest. The number we quote is the number you pay, and it’s agreed before any work starts. If you’re a senior or a veteran, there’s a permanent 10% discount on every job. If you have a written estimate from another company, bring it in. We’ll give you a free second opinion without any pressure.
Our Gate Parts & Welding Services in North Richland Hills
When a gate stops working in North Richland Hills, the cause is rarely one single part. The clay soil moves, the post leans, the hinges bind, and then the opener or the latch fails from the strain. So we don’t just swap a part and leave. We repair the whole system. This is what our Gate Parts & Welding team handles most often in this city.
Hinge Replacement
Hinge pins on ornamental iron gates in North Richland Hills don’t usually wear out on their own. They get stripped when the post leans a few degrees and the gate starts dragging. We remove the old welded hinges, re-plumb the post first, and then weld new heavy-duty hinge barrels in place. If you just replace the hinge without fixing the post, you’ll fix it twice.
Post Replacement
This is the biggest one in North Richland Hills. The expansive Tarrant County clay under this city swells when it rains and shrinks in the summer drought, and gate posts heave, lean, or sink inches over a few seasons. We core out the old footing, dig deeper than the original builder did, repour with concrete, and reset the post plumb before any mechanical work begins. Skip this step and the next repair is guaranteed, because the post is still moving.
Rail Repair
A bent or cracked top or bottom rail changes the gate’s geometry, which throws off the hinges, the latch, and the opener’s travel. On North Richland Hills gates, we often see rails that were undersized from the beginning or welded poorly at the corners decades ago. We straighten what’s salvageable and cut out and replace what isn’t, then weld it hot and clean on site.
Custom Welding
Some gates need a part that was discontinued twenty years ago. Some need a reinforcement plate the original manufacturer never thought to include. Some need a custom bracket for a solar panel, or a welded mount for a keypad on a stone column. Hal welds on site in North Richland Hills, which means the gate stays in your driveway, the fit is exact, and you watch the work happen if you want.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
North Richland Hills has a specific mix of gate equipment. The 1980s and 1990s HOA subdivisions along Davis Boulevard and Precinct Line Road ran heavily on Viking and LiftMaster slide and swing operators, and those are the units we see failing in clusters now. We also service Ghost Controls, BFT, and Linear regularly for North Richland Hills Gate Motor & Opener repairs. We keep common parts for these brands stocked locally, so a rack and pinion kit or a control board doesn’t have to sit on a freight truck for a week. Certified to service nine major brands, including Viking, Ghost Controls, Linear, and BFT, we can usually match the operator you already have instead of pressuring you into a full replacement.
Common Gate Parts & Welding Problems We See in North Richland Hills Homes
- Hinge post heave from expansive clay. The shrink-swell soil under North Richland Hills moves more between drought and wet season than almost anywhere else in the DFW metro. Posts lean, hinge pins strip, and a gate that closed fine in May jams by August.
- 1990s Viking slide operators freezing mid-open. Those community entry gates on Davis Boulevard and Precinct Line Road take a beating every weekday morning. When the rack and pinion strips or the gate sags onto the safety photocell, the HOA has a problem before 8 a.m.
- Undersized solar installations on long driveways. Acreage entrances in and around North Richland Hills often run on solar because running mains power to the gate is impractical. Panels get sized for sunny August, not a cloudy February week, and the battery bank gives out right when you need the gate most.
- Latch misalignment from gate sag. By the time a North Richland Hills homeowner calls us, the latch hasn’t lined up for months and someone has been lifting the gate manually. The fix usually starts at the post, not at the latch.
Pricing for Gate Parts & Welding in North Richland Hills, TX
Here’s what our customers in North Richland Hills typically pay. Hinge replacement on a standard ornamental iron driveway gate runs $180 to $340 per gate, depending on how much welding the old hinge pockets need. Post replacement runs $400 to $900 per post, and that includes the excavation, concrete, and re-plumbing the gate. Rail repair is usually $150 to $450, and custom welding runs $90 to $160 per hour plus materials. A full Gate Parts & Welding in North Richland Hills job that involves a leaning post, stripped hinges, and a new opener often lands between $1,200 and $2,600.
The price we quote on the phone or in person is the price you pay, agreed before any work starts. We also take $40 off any repair over $200, and there’s no trip charge inside the county. Call (903) 829-4499 and we’ll give you a straight number.
We Also Serve Cities Near North Richland Hills
Our service area includes North Richland Hills and the surrounding Tarrant County communities. We work regularly in Hurst, Bedford, Colleyville, and Keller, so if you’re one street over from the city line, don’t worry about it. Call us and we’ll tell you when we can be there.
Why North Richland Hills Gates Fail Differently
North Richland Hills experienced its primary suburban buildout in the 1980s and 1990s, which produced a dense concentration of HOA-governed neighborhoods with both community entrance gates and individual driveway gates. Those automated systems are now 25 to 40 years old and failing in waves. But the bigger issue is what’s underneath every one of them. This city sits on heavy expansive Tarrant County clay, the same shrink-swell soil that cracks foundations and heaved driveways across the broader DFW area. Between summer drought and wet-season saturation, gate posts in North Richland Hills can move multiple inches in a few seasons. That movement chronically knocks automatic gates out of alignment, strips hinge pins, and forces latch misalignment. On nearly every parts or welding job here, the post footing has to be re-plumbed and reset before we even touch the electrical or mechanical work. Neighboring Hurst and Haltom City don’t see this pattern at nearly the same rate, because their gate stock is newer and their post depths were sometimes specified differently.
A Field Fix on Davis Boulevard
We were called to a brick ranch on a Davis Boulevard subdivision after a Viking slide gate operator stripped its rack and pinion and the gate sagged onto the safety photocell. The HOA couldn’t open the community entrance for morning traffic, and the board was getting calls from every block. Our crew had to cut out the old hinge post footing first, re-plumb the post with extra concrete depth, then weld a reinforced rail and install a new LiftMaster slide operator with a loop detector before the entrance could open again. That’s the reality of gate work in North Richland Hills. The part that failed was only the last domino. The first domino fell years ago, when the clay started moving under the post. Show me the gate closing on its own and I’ll show you where it’s failing.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Richland Hills
North Richland Hills sits on a thicker layer of expansive Tarrant County clay than many surrounding suburbs, and the original 1980s and 1990s post footings were often poured too shallow for this soil. When the clay shrinks in summer drought and swells after rain, posts move. We re-plumb and reset them deeper, with more concrete, so they stay put for decades instead of a few seasons. If your post is already leaning, the sooner you call (903) 829-4499, the less welding it’ll take to fix the gate.
No, and we won’t. Welding a sagging gate panel without first re-plumbing the post is like painting over a crack in a foundation. The gate sags because the post moved under the clay, and no weld on the panel will hold against that movement for long. We fix the post first, then address the panel and hinges. Call us for a free estimate, and we’ll show you exactly what’s moving.
For a long driveway in North Richland Hills, we recommend sizing the solar panel and battery bank for the worst week of February, not the average week of June. Most failures we see come from panels that are too small and battery banks that can’t handle multi-day cloud cover. We’ll spec a system with enough reserve to run your gate through a North Texas winter, and we’ll weld a custom mount so the panel faces south and clears any shade from mature trees. Call (903) 829-4499 and we’ll look at your entrance.
Because most of those community gates along Davis Boulevard and Precinct Line Road were installed in the 1990s with Viking slide operators, and those units are now 25 to 40 years old. When a rack and pinion strips or a gate sags onto its safety photocell, it tends to happen during the weekday rush, exactly when the HOA board can’t reach anyone. We answer the phone live at 6 a.m. and we’re familiar with the layouts of most of these subdivisions, so we can usually get the gate open and then schedule the permanent fix.
Yes. Photo-eyes and edge sensors stop the gate before it hits a child, a pet, a car, or a delivery person. They’re required by code for automatic gates in Texas, and they also protect you from liability. We test and align them on every Gate Access Control in North Richland Hills system we touch. If yours are broken, missing, or bypassed, we’ll tell you and we’ll fix them as part of the job.
Call Gatewood Fence & Gate in North Richland Hills
If your gate is sagging, grinding, or refusing to open, don’t wait until the post pulls the hinges off entirely. Call (903) 829-4499. A live person answers. We’ll give you a real number, agreed before any work starts, and Hal will be there himself or send someone he’d trust on his own gate. Fix the panel without the post and you’ll fix it twice. Fix the post first, weld it right, and you won’t think about your gate again for a long time.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.