Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across North Richland Hills
Gate access control repair in North Richland Hills usually costs between $185 and $520 depending on whether you need a keypad reprogrammed or an entire 1990s Viking slide operator rebuilt, and we can have someone at your gate the same day you call. Most of the systems we see in North Richland Hills were installed when these subdivisions went in during the 80s and 90s, and they’re now failing in groups. If your entrance gate off Davis Boulevard or Precinct Line Road won’t accept a code, won’t close, or grinds when it moves, call (903) 829-4499 and a live person picks up. We work on gates in North Richland Hills every week, so we know what your HOA board is up against.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Access Control Company
We’re not a nationwide outfit with a rotating cast of people who have never seen your gate before. Hal Gatewood started this shop in 2001, and his name is on the door. When a community entrance gate in North Richland Hills goes down, the person who shows up knows the difference between a 1994 Viking board and a 2007 LiftMaster board by looking at it, because he’s been working on both since they were new.
North Richland Hills has a specific problem: hundreds of HOA entrance gates and driveway gates all reached end-of-life around the same time. That means a gate that worked fine in March can wipe its memory after the first real freeze, and every resident’s keypad code vanishes. Hal has seen this enough times along the Davis Boulevard corridor that he keeps the replacement boards and remotes for those older systems on the truck. He also stands behind every job with the 90-Day Done Right Promise in writing. If something’s not right, one call brings him back, no runaround.
The shop has a published address and license number anyone can look up. If you’d rather drive over and look Hal in the eye before you hire him, that’s fine. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Our Gate Access Control Services in North Richland Hills
Keypad Entry Systems
Keypad entry is the workhorse of North Richland Hills HOA gates. We replace worn keypads, reprogram codes after a board loses memory, and hard-wire new units when wireless signal won’t reach across a wide driveway. A basic keypad replacement in North Richland Hills runs $120 to $260. If your keypad accepts the code but the gate won’t move, often the problem isn’t the keypad at all, it’s the operator down the line that lost its programming, and we’ll trace that before selling you a part you don’t need.
Video Intercom Systems
Video intercoms matter in North Richland Hills because a lot of gated communities don’t have a guard booth, just a camera and a call button. When the intercom fails, delivery drivers park outside the gate and every resident’s day gets longer. We install and repair wired and wireless video intercoms on community entrance gates and private driveway gates. A typical video intercom repair in North Richland Hills runs $225 to $480, and a new system install starts around $900 depending on wire runs and whether you need interior monitors.
Card Reader and Vehicle Loop Systems
Card readers and loop detectors are what keep a gate from closing on a car that’s halfway through. On narrow 1980s lots with shared driveway rights-of-way in North Richland Hills, there’s often no room for a swing gate, so slide gates with card readers and loop detectors are the standard. When a loop detector fails, the gate thinks the driveway is empty and starts closing on moving traffic. We replace and tune loop detectors, reprogram card readers, and get the gate closing gently on vehicles and pedestrians, not on them.
Phone Entry Systems
Phone entry lets a visitor call your phone from the gate, and you press a button to let them in. After a winter ice event in North Richland Hills, these systems often fail because the control board sat in sub-freezing temperatures for days without weatherproofing. We replace fried boards, re-seal enclosures, and reprogram the forwarding numbers. A phone entry board replacement in North Richland Hills typically runs $200 to $400.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We’re certified on nine major gate brands, and in North Richland Hills that means we see a lot of Viking and LiftMaster slide operators from the 1990s, plus DoorKing and Elite units on newer installations. Whatever your gate runs, we stock the parts and can usually get a North Richland Hills gate back in service same-day. We don’t haul your operator away and send it to a rebuild shop. We fix it in place, on site, with welding if the bracket or rack needs it.
Common Gate Access Control Problems We See in North Richland Hills Homes
- Post heave on shrink-swell clay shifts the slide gate out of mesh. North Richland Hills sits on the same Tarrant County clay that moves several inches between summer drought and wet-season saturation. When the post heaves, the rack and pinion separate just enough that the keypad entry trips the operator’s overload before the gate even moves.
- 1990s Viking and LiftMaster boards erase programming after a freeze. A repeat of the February 2021 freeze exposed how many North Richland Hills gates have control boards with no weatherproofing. When the board loses memory, every resident’s remote and keypad code is gone without warning.
- Failed loop detectors block both vehicles and pedestrians on shared driveways. On narrow lots with shared driveway rights-of-way, there’s no room for a temporary swing gate. When a loop detector fails on a slide gate, pedestrian and vehicle access both stop until someone fixes the detector.
- Safety photocells knocked out of alignment by shifting posts. A post that’s heaved three inches throws the photocell beam out of alignment, and the gate refuses to close. Some HOA maintenance folks tape the cell to the post as a workaround, which is a safety failure. We re-set the post and re-align the cell properly.
Pricing for Gate Access Control in North Richland Hills, TX
We Also Serve Cities Near North Richland Hills
We handle gate access control jobs in Hurst, Bedford, Colleyville, and Keller, so if you’re a few minutes east or west of North Richland Hills, the same crew covers you. Read more about our Gate Access Control work or see what we do specifically in North Richland Hills.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in North Richland Hills
The clay under your gate post shifts with the seasons. In North Richland Hills summers, the soil dries and shrinks, the post leans or sinks, and the rack and pinion no longer mesh cleanly. You hear grinding, the gate shudders, and eventually the operator trips its overload and won’t move at all. The real fix is re-setting the post on a deeper concrete footing, then re-meshing the rack and pinion. Patching the pinion alone won’t hold. Call (903) 829-4499 for a free estimate.
Yes. We don’t shut down the whole entrance. On 1990s Viking slide gates in North Richland Hills, we swap the keypad and reprogram the board in place, usually within a couple of hours, while the gate keeps working on manual for vehicles that need to pass. If the existing wire run is still solid we reuse it, which saves the HOA money and keeps the work shorter. Call (903) 829-4499 and Hal can schedule the work during a low-traffic window.
Any automatic gate in North Richland Hills needs working safety photocells and a functioning reverse or obstruction sensor, at minimum. On slide gates, the loop detector also serves as a safety feature because it holds the gate open while a vehicle sits over the loop. If your gate stands a chance of closing on a person or a car, it’s a life-safety problem, not a convenience issue. We check every safety device on every gate access control job and won’t leave a gate in service that isn’t protected. Call (903) 829-4499 to schedule a safety inspection.
You fix the post, not the panel. A gate sags in the hinge post, not in the middle. On shared driveways in North Richland Hills where there’s no room to swing the gate open fully, we use a temporary brace to hold the gate in place while we cut and re-weld the hinge post. The gate never leaves the driveway. On-site welding means we can do the whole repair in a tight space without a crane or a flatbed. Call (903) 829-4499 for an estimate.
In North Richland Hills, if a phone entry intercom stops working after a freeze, the control board is usually the culprit. Water gets into the enclosure, freezes, shorts traces on the board, and when it thaws the intercom is dead. Sometimes the board can be repaired; more often on 1990s systems it needs a direct replacement. We re-seal the enclosure so the next ice event doesn’t kill the new board. Phone entry board replacement in North Richland Hills runs $200 to $400. Call (903) 829-4499 and Hal will tell you exactly what you’re looking at.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.