Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Richland Hills
Gate installation in North Richland Hills usually costs $1,400-$4,800 for a standard driveway swing gate, $2,200-$6,500 for a sliding gate with operator, and $450-$1,200 for a pedestrian gate, with the work typically done in one to two days once HOA approval clears. We’re Gatewood Fence & Gate, and Hal Gatewood has been building and repairing gates the right way since 2001. If you live off Davis Boulevard, Rufe Snow, or anywhere in the 76180 or 76182 zip codes, you’ll get a straight answer from the person who answers the phone at (903) 829-4499, and that person knows North Richland Hills well enough to tell you what your HOA will say before you even file the request.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Installation Company
We’ve installed and repaired hundreds of gates in the subdivisions that line the Hwy 26 corridor and the tree-lined streets around North Richland Hills. The city gave us something specific to learn: HOA architectural committees here are strict about gate style, finish, and height, and they enforce it against the original spec sheets from the 1980s and 1990s. We know what those committees ask for before we dig the first post hole. That local knowledge means your gate gets approved the first time instead of bouncing back and forth for two months. When a board off Precinct Line Road needs a like-for-like replacement on a late-1990s Viking slide operator, we’re the crew that shows up with the right parts and the welding machine in the truck, not a sales rep with a brochure.
Hal Gatewood puts his name on every invoice, and his address is published. Call the number, and a live person answers around the clock. The whole crew is background-checked and uniformed, and every single job carries our 90-Day Done Right Promise in writing: if it’s not done right, we make it right, one call and we’re back. That’s the kind of accountability that matters to homeowners in North Richland Hills who’ve been burned before.
Our Gate Installation Services in North Richland Hills
Driveway Gate Installation
A new automatic driveway gate in North Richland Hills typically runs $1,800-$4,600 depending on the span, the operator brand, and whether we’re running power to a panel that was never there. Most subdivisions built in the 1980s and 1990s never pulled electrical to the driveway gate location, so a big chunk of the job is trenching underground conduit from the house panel. We handle the full run, including the safety edges and the operator wiring, so the gate doesn’t just look right, it works when the February ice hits.
Pedestrian Gate Installation
Pedestrian gates in North Richland Hills run $450-$1,200 typically, and this is the job where finish matters more than anything. HOA committees in the brick ranch neighborhoods off Mid-Cities Boulevard are particular about powder-coat color matching the existing ironwork. We weld the gate on site or install a pre-built unit if the specs call for it, and we hang it on posts set deep enough to survive the clay soils doing what they do here.
Sliding Gate Installation
For long driveways and community entrance gates, a sliding gate is usually the right call and runs $2,200-$6,500 in the North Richland Hills market. The advantage on heavy Tarrant County clay is simple: a slide gate rides on a track or cantilever system instead of swinging on hinge posts, so it tolerates ground movement far better than a swing gate. We install rack and pinion drives, loop detectors, and safety photocells, and we calibrate everything on site so the gate doesn’t slam on the last car through.
Swing Gate Installation
A double swing gate with automation in North Richland Hills typically runs $2,800-$7,200, depending on the post footing requirements and the operator. The thing a lot of homeowners don’t plan for is that the hinge posts have to be set below grade deep enough to resist the seasonal heave, which on this clay means deeper and wider footings than a gate company might pour in, say, Keller with its slightly sandier pockets. We rebuild posts, re-plumb gates, and we don’t just hang a panel and call it done; a gate sags in the hinge post, not in the middle, and that is where we start.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We install and service operators from the brands North Richland Hills HOAs actually specified back in the 1990s: Viking, Ghost Controls, and DoorKing are the units we see most on community gates along Davis Boulevard and Precinct Line Road. We keep common parts on the truck so a like-for-like swap doesn’t mean a week of waiting on a freight delivery. If your HOA wants to move off a 1994 Viking and onto a modern LiftMaster or another brand, we’ll match it, wire it, and make sure the loop detector and safety edges all talk to each other before we leave.
We’re certified to work on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a flex; it’s just a fact when you’ve been doing this since 2001 and welding on site in North Richland Hills driveways.
Common Gate Installation Problems We See in North Richland Hills Homes
- HOA rejection on finish or height. A homeowner off Rufe Snow Road orders a black ornamental iron gate, files the architectural request, and gets denied because the spec sheet from 1997 calls for a specific Brown-bronze powder coat. We check the subdivision’s original specs before we order anything, so you don’t buy a gate twice.
- Post heave from Tarrant clay. The shrink-swell soil under the 76180 zip moves enough between August and March to throw a swing gate two inches out of alignment. That trips the safety photocells constantly, and suddenly the gate won’t close. We set posts deeper and pour footings wider than code minimum because we know what this ground does.
- Underbuilt 1990s community gate operators. The Viking slide operators installed on dozens of shared entry gates in the 1990s are all reaching end-of-life within the same three-year window. HOAs that delay maintenance end up with a gate jammed open at 10 a.m. on a Tuesday; we get that call more than any other, and we handle emergency commercial gate work same-day when the board is on site and the property manager is logging minutes.
- Drainage failures around the post footings. When a driveway gate’s toe wall or post collar traps water against the concrete, freeze-thaw cycles during a February 2021-style event will heave the post even further. We saw this across the suburban buildout areas of North Richland Hills and we now design drainage away from every post we set.
Pricing for Gate Installation in North Richland Hills, TX
A standard single swing driveway gate with a basic operator in North Richland Hills runs about $1,400-$2,800. A double swing gate with automation on a wide driveway runs $2,800-$7,200. A sliding gate with a rack and pinion operator runs $2,200-$6,500. A pedestrian gate runs $450-$1,200. What moves the number: the gate’s finish spec from the HOA, the depth of the post footings we need to pour for the clay here, the length of the electrical run, and whether you want loop detectors, safety photocells, or both. Every price is quoted and agreed in writing before any work starts, and we never show up with a surprise invoice. Estimates are free. Call (903) 829-4499 and we’ll come out, measure, and give you a real number.
We Also Serve Cities Near North Richland Hills
Our crew works gates in Hurst, Bedford, Colleyville, and Keller, so if your HOA spans multiple cities or you’ve got a family member a few exits over who needs the same work, we’ll make one trip count. For the full picture of what our Gate Installation team does across the region, that page has the details.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in North Richland Hills
Yes, North Richland Hills requires a permit for any gate installation that involves an electrical run, and your HOA will almost always need to approve the gate’s style, height, and finish before the city will even look at the permit application. The HOA approval comes first, and many subdivisions here still enforce the original 1980s and 1990s spec sheets, so check your community’s architectural guidelines before you order anything. We can help you pull the right paperwork. Call (903) 829-4499 and we’ll walk you through the order of operations.
We can do either, but our honest recommendation for most North Richland Hills HOAs is to switch to a modern LiftMaster slide operator and keep the existing gate and track where possible. The Viking units off Davis Boulevard are hitting end-of-life together, and matching a 30-year-old board means paying a premium for parts that were never designed for another decade. A swap is usually cheaper than repeated repairs. We’ll quote both options before any work starts.
The expansive clay in North Richland Hills moves enough between dry summers and wet winters to heave a shallow post several inches over three or four seasons, and that will knock an automatic gate out of alignment every single time. The fix is in the footing: we set posts below the active soil zone and pour footings wider than code minimum, because that’s the only way a gate survives this ground. We’ve seen the difference between a post set at 24 inches and a post set at 36 inches in this exact city, and we’ll show you what a proper footing looks like before we pour.
Yes, and we do it regularly. We’ll work directly with your property manager on the spec, the schedule, and the communication plan so residents know when the entry gate will be down and for how long. We were called to a gated community off Davis Boulevard when their 1994 Viking slide operator seized on a Tuesday at 10 a.m., locking residents out. After the board approved an emergency swap, our tech reset the leaning post footing on that heavy clay, then mounted a new LiftMaster slide operator with a rack and pinion drive and recalibrated the loop detector so the gate stopped slamming on the last car through. The whole job had to move fast because the HOA’s property manager was on site logging every minute. We’re used to being watched, and we work fine under that kind of pressure.
A loop detector is buried in the driveway and senses a vehicle’s metal mass, telling the gate to open when a car pulls up; a safety photocell is an infrared beam across the gate opening that tells the gate to stop and reverse if a car, person, or dog breaks the beam while the gate is moving. On any automatic sliding gate in North Richland Hills, you need both, because the loop opens the gate and the photocell keeps it from closing on someone. We install and calibrate both as standard on every automated sliding gate we build.
Contact Gatewood Fence & Gate for Gate Installation in North Richland Hills
If you’re reading this because your HOA just stamped a rejection on a gate you already ordered, or because your community’s 30-year-old slide operator died mid-morning, here’s what you do: call (903) 829-4499. A live person answers. We’ll talk through your HOA’s spec sheet, schedule a site visit to measure and mark the footings, and hand you a written price before any work begins. Hal Gatewood’s name is on the shop, and the shop is just down the road, and that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills since 2001.