Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Grapevine
Gate Installation in Grapevine comes down to two things: the post in the ground and the weld holding the gate to it. A sagging gate is rarely a bent gate panel. It’s a hinge post that the Blackland Prairie clay has heaved out of plumb, and until that post is cut, straightened, and re-welded, no amount of hinge grease or adjustment will fix the problem. If you live in Grapevine and your gate drags, binds, or won’t stay latched, call us at (903) 829-4499. Hal Gatewood has been welding and repairing gates since 2001, and the work happens in your driveway, not in some shop across town.
We get calls from Grapevine homeowners every week who have already called two other companies. One quoted a full gate replacement over the phone without seeing it. The other never showed. That’s not how Gatewood Fence & Gate operates. The name is on the shop, the address is published, and the person who shows up is accountable to you face to face.
Why Gatewood Fence & Gate Is Grapevine’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated, and we’ve been at this since 2001. Hal Gatewood answers the phone himself more often than not, and if he doesn’t, a live person in the shop does. No voicemail maze, no call center, no chatbot. When you call about a gate that won’t close on a Sunday afternoon, you talk to a person who knows the difference between a Gatewood hinge repair and a band-aid fix.
Grapevine customers deal with us directly, and they see the same face from quote to completion. We serve this town specifically because it has a unique problem: resort traffic. Gates along the Lake Grapevine corridor and around Gaylord Texan Drive run constantly. That changes how we diagnose, what parts we recommend, and how we weld. A residential-grade opener on a short-term rental gate near Historic Main Street sees cycles a builder never planned for. We know to look for that before we quote anything.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround, no arguing, no “we’ll put you on the schedule next month.” That promise is stamped on your invoice, not buried in fine print. And our crew is background-checked and uniformed on every job, whether it’s a hinge replacement in a 1990s-era subdivision or custom welding on a lake-view estate.
Our Gate Parts & Welding Services in Grapevine
This page covers the work we do most often in Grapevine. If you need something outside this list, our Gate Parts & Welding team will tell you straight whether we can do it and what it costs. Here’s what Grapevine homeowners call us for:
Hinge Replacement
Hinges on ornamental iron and steel gates in Grapevine take a beating they were never designed for. Blackland Prairie clay swells in wet seasons and contracts in dry heat, which shifts posts a fraction of an inch at a time. Enough cycles of that and the hinge welds crack, the pin binds, and the gate starts groaning like it’s tired. We install heavy-barrel hinges rated for the weight of the gate, weld them in place, and set the post so the gate swings true. A typical hinge replacement in Grapevine runs $220-$380 per hinge, depending on gate weight and access.
Post Replacement
A gate sags in the hinge post, not in the middle. If your post has heaved more than an inch or two out of plumb, replacing it is the honest fix. We cut the old post below grade, set a new one in concrete with proper drainage, and re-hang the gate dead level. In Grapevine, post replacement runs $450-$900 for a standard residential gate post, and more for heavy ornamental gates with welded infill panels. Shoreline properties along Lake Grapevine need deeper footings because the soil never really dries out. We account for that in the quote.
Rail Repair
Rails on welded iron gates crack at the joints and along the bottom rail where moisture sits. Left alone, a cracked rail lets the gate flex, which then stresses the hinges, which then pulls the post. It’s all connected. We cut out the rusted or cracked section, weld in new steel, grind it smooth, and powder-coat the repair to match. Rail repair in Grapevine typically runs $180-$400 per rail section, depending on length and whether we’re matching a powder-coat finish or repainting on site.
Custom Welding
Grapevine has more custom ornamental gates than most North Texas suburbs, thanks to the lake-view communities and the HOAs that mandate wrought-iron and powder-coated steel. When a custom gate fails, you can’t just order a replacement panel from a catalog. We weld on site, matching the existing scrollwork, picket spacing, and finish as closely as the material allows. Custom welding projects in Grapevine start around $350 for a small repair and run up from there for full fabrication and gate rebuilds. Hal will tell you if a piece is worth saving or if you’re better off rebuilding. That’s the repair-first philosophy: fix what’s fixable, replace what isn’t, and never sell you a panel you don’t need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We’re certified to service nine major gate brands, and the ones we see most often in Grapevine are Viking, DoorKing, and Elite for Grapevine Gate Motor & Opener work. These are popular with the commercial and resort properties around the lake, and they show up on a lot of high-end residential gates too. We stock common replacement parts for these brands and can usually have specialty components in hand within a couple of days. If your opener is a Ghost Controls unit on a residential gate near Main Street, we service those too. The point is: bring us the brand, and we’ll tell you honestly whether the board is worth replacing or whether the whole operator has reached the end of its life.
Common Gate Parts & Welding Problems We See in Grapevine Homes
After 20-plus years of welding in this area, we can almost predict what a Grapevine gate will need before we pull into the driveway. Here are the four patterns we see most often:
- Heaved hinge posts on Blackland Prairie clay. Grapevine sits on expansive clay that moves constantly. Properties in the interior neighborhoods, especially the 1970s-90s ranch tracts, deal with posts that lean a little more every year. Hinge welds tear, gates bind, and the fix starts at the post.
- Residential-grade operators on resort rental gates. Short-term rentals near Historic Main Street and the Gaylord Texan run their gates dozens of times a day. A residential operator rated for 15-20 daily cycles burns out in a few summers of Grapevine heat. Circuit boards and solenoids fry first, then the motor. We flag the commercial upgrade as the standard fix here.
- Shoreline moisture attacking posts and welds. Properties along Lake Grapevine have soil that stays damp year-round. Posts shift constantly, rack and pinion tracks fall out of alignment, and homeowners end up convinced the gate panel is bent. It’s usually the post, not the panel.
- 100-degree summers killing rubber and electronics. Grapevine regularly hits triple digits in July and August. Weather seals crack, capacitors swell, and printed circuit boards develop hairline fractures from heat cycling. If your gate opener dies in August, heat damage is the first thing we check.
Pricing for Gate Parts & Welding in Grapevine, TX
Here are the numbers we quoted earlier, gathered in one place for quick reference:
- Hinge replacement: $220-$380 per hinge
- Post replacement: $450-$900
- Rail repair: $180-$400 per section
- Custom welding: starts at $350
These are Grapevine market rates as we see them. Heavy ornamental gates, poor access, lakefront footings, and custom finish matching all push costs toward the top of those ranges. Before any work starts, you get a written price and we agree on it together. No trip charge inside the county, $40 off any repair over $200, and if another company quoted you in writing, we’ll give you a free second opinion on that estimate. Call (903) 829-4499 and we’ll come look at the gate, give you a number, and leave the decision to you.
We Also Serve Cities Near Grapevine
Gatewood Fence & Gate serves the whole metro-west corridor. From our Dallas-Fort Worth office, crews cover Grapevine and the surrounding communities: Southlake, Colleyville, Euless, and Coppell. If you’re just over the line in one of those towns, the same upfront pricing and the same 90-Day Done Right Promise apply. Call before noon and you’ll usually see us the same week.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Grapevine
Shoreline soil stays wet year-round, which means the Blackland Prairie clay under your gate posts never stops moving. Posts heave and settle in ways that dry soil doesn’t, and over time the hinge welds crack and the gate sags. The fix is a properly set post with drainage and a welded hinge barrel rated for the gate’s weight, not a shim behind the hinge. Call (903) 829-4499 and we’ll diagnose the post before we touch a hinge.
Yes. Most HOAs around Lake Grapevine and the newer subdivisions mandate ornamental iron or powder-coated steel with specific picket profiles and scrollwork. We match those details as closely as the material allows, weld on site, and finish to match the existing color. Bring us your HOA spec sheet and we’ll show you exactly where the welds will go before we strike an arc.
Count the cycles. If your rental gate opens and closes 40 or 50 times a day through the summer, a residential operator rated for 15-20 cycles is already over capacity. The first signs are a hot motor, slow travel in the afternoon heat, or a control board that reboots randomly. In Grapevine’s resort corridor, we recommend a commercial-grade Viking or DoorKing operator and Gate Access Control - Grapevine systems rated for continuous duty on any rental property. We’ll help you run the numbers and give you a written quote before we order anything.
In most cases, the hinge post has moved. Grapevine’s older interior neighborhoods sit on some of the most active Blackland Prairie clay in the county, and a 25-year-old post set in a shallow footing will drift. The gate itself is probably straight. We cut out the old post, set a new one deep with concrete and compacted drainage, and re-hang the gate level. That fixes the sag permanently, where a hinge adjustment alone would buy you a season.
Yes. Any automated gate installed or repaired in Grapevine must meet current UL 325 safety standards, which means working safety edges or photocells and proper force settings. That’s federal law, not just a nice-to-have. A gate that can close on a child or a pet is a serious liability, so we test every safety circuit after a weld job or hinge repair and flag anything that doesn’t meet code before we call the job done.
Call Gatewood Fence & Gate for Gate Parts & Welding in Grapevine
If your gate is sagging, grinding, or dead on its post, call (903) 829-4499 and talk to a real person. Hal Gatewood has been fixing gates since 2001, and he’ll tell you the truth about what needs welding, what needs replacing, and what you can leave alone. Estimates are free, the price is set before work starts, and every job carries the 90-Day Done Right Promise. The name is on the shop, the shop is down the road, and the phone gets answered.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grapevine and the surrounding communities since 2001.