Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Highland Park
Gate parts and welding in Highland Park usually means one of two things: a custom iron gate that’s sagging, cracked, or no longer latching, or an operator and hardware system that’s failing under Texas heat and shifting soil. Most jobs run $350-$1,800 depending on whether we’re re-welding a hinge, resetting a post, or fabricating a matching iron section. Hal Gatewood has been doing this work since 2001, and his crew welds on site so your gate never leaves your driveway. If you’re in Highland Park and the gate won’t close or the post is leaning, call (903) 829-4499 and a live person answers.
Why Gatewood Fence & Gate Is Highland Park’s Preferred Gate Parts & Welding Company
Highland Park gates are not like the ones across the highway in Dallas. Almost every estate behind Beverly Drive, Lakeside Drive, or Armstrong Parkway has a custom wrought-iron or powder-coated steel gate built between the 1920s and 1960s. The hinge brackets, latch plates, and scrollwork were fabricated by hand, and the original shops that made them are long gone. We keep a welding rig in the truck and repair what’s there rather than hauling it off and ordering a generic replacement. That matters when the gate is original to a 1930s Georgian and the owner wants it to stay that way.
Our reputation across Highland Park comes from showing up on time, quoting the price before we strike an arc, and standing behind the work with the 90-Day Done Right Promise in writing. If a weld fails or a post settles, one call brings Hal back. No voicemail, no runaround. That’s the name on the shop.
Our Gate Parts & Welding Services in Highland Park
Hinge Replacement
On older Highland Park estate gates, the hinges are often hand-forged or cast in patterns nobody manufactures anymore. When a hinge pin wears out or a leaf cracks, we don’t swap in a farm-supply bracket. We match the original profile, weld it in place, and grind the finish so the repair disappears. We also check whether the hinge post has moved, because a gate that sags in the hinge post gets fixed differently than one that just needs a new pin. Fix the panel without the post and you’ll fix it twice.
Post Replacement
Post replacement in Highland Park is a bigger job than most homeowners expect, and it starts with the black gumbo soil. The expansive clay under this town shrinks in drought and swells after rain, and that cycle pushes gate post footings out of plumb year over year. We dig out the old footing, set the new post deeper than the original, and pour concrete that works with the soil rather than against it. Because Highland Park is its own incorporated town, a structural post replacement may require a permit from Town of Highland Park Public Works. We pull it. A lot of Dallas gate companies don’t, and unpermitted welds show up later during title searches on estate sales.
Rail Repair
Long driveways in Highland Park mean long gate panels, and long panels put stress on the top and bottom rails. When a rail cracks or sags, we grind out the failed section, weld in new steel, and reinforce the joint so the panel doesn’t flex. Triple-digit summer heat expands long steel panels measurably, which is why we also check slide gate rollers and rack alignment while we’re under the panel. A rail that’s been re-welded without a roller adjustment will fail again by September.
Custom Welding
This is the work most shops in the Dallas area won’t touch. Matching the original scrollwork on a 1930s Highland Park gate means forging or shaping steel by hand, not ordering a part from a catalog. We reproduce missing finials, repair broken scroll ends, and rebuild decorative hinge straps on site. The weld has to be strong and the finish has to match, and both matter when the gate is visible from the street. Our Gate Parts & Welding team does this work in the driveway with a mobile rig, so the gate stays put and you see exactly what was done.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
Highland Park estates lean toward premium operators, and we’re certified to service BFT, Linear, Viking, and Ghost Controls, plus the full lineup of FAAC and Elite systems that show up on custom gates across the Park Cities. We keep common boards, limit switches, and safety photocell parts stocked for these brands, so a service call usually doesn’t turn into a two-week wait for a part out of Houston. If it’s on your gate and it was made in the last 25 years, we’ve probably welded next to it or wired it.
Common Gate Parts & Welding Problems We See in Highland Park Homes
- Hinge posts racked out of plumb. The black gumbo soil under Highland Park heaves with every drought-and-rain cycle. A post that was plumb in April can be leaning by October, and the gate sags with it. The fix is a deeper footing, not a longer latch.
- Thermal expansion tripping safety photocells. On hot afternoons, long steel slide gates grow just enough to drift into the photocell beam and stop mid-cycle. The operator board is usually fine. We adjust the rack and limit switches seasonally so the gate doesn’t strand itself in the sun.
- Non-standard hinge and latch components. Original iron gates from the 1920s through 1960s were fabricated by hand, and no one makes the exact hinge pin or latch plate anymore. Replacing a hinge means custom welding, not a trip to the hardware store.
- Weld fatigue at the latch stile. Heavy estate gates flex every time they cycle, and the weld where the latch plate meets the stile is the first place metal fatugues. We re-weld and reinforce the plate before it fails completely and leaves the gate swinging loose.
Pricing for Gate Parts & Welding in Highland Park, TX
Here’s what we actually quote for this work in Highland Park. Hinge replacement on a typical estate gate runs $350-$700 per hinge depending on the fabrication involved. Full post replacement with a deeper concrete footing runs $600-$1,200 per post, plus the Town of Highland Park permit fee if one applies. Rail repair with reinforcement usually lands between $400 and $900, and custom scrollwork or finial matching runs $250-$800 per piece depending on the original pattern. The price is quoted and agreed before any work starts, and it doesn’t change at the door. There’s no trip charge inside the county, and $40 off any repair over $200. Call (903) 829-4499 for an exact quote. Estimates are free.
We Also Serve Cities Near Highland Park
We work regularly in Coppell, Plano, Southlake, and Irving, and the same crew that welds in Highland Park handles those calls. If your gate is outside Highland Park proper but close enough to see the Dallas skyline, we’ll come out, quote it straight, and weld it on site.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Highland Park
Yes, in many cases it does. Highland Park has its own building department separate from Dallas, and structural work at the hinge post or post footing is the kind of repair that may require a permit from Town of Highland Park Public Works. We pull the permit, handle the inspection, and keep the paperwork organized. A weld on the panel itself typically doesn’t require one, but the moment we’re moving earth or setting a new post, we’re calling the town. Call (903) 829-4499 and we’ll tell you what applies to your gate before we start.
Because the panel usually isn’t the problem. When a Highland Park gate sags, the hinge post has usually moved in the black gumbo soil. The weld might be holding, but the post it’s hanging from is out of plumb. We find this on older estates all the time, and the fix is resetting the post with a deeper footing, then re-aligning the hinges. If a previous contractor welded the panel and skipped the post, the gate will sag again within a season. Call us and we’ll check the post first.
We can. It’s hand work, not a catalog order. We shape and weld the replacement scroll, finial, or hinge strap on site to match the original profile, then finish it so the repair doesn’t stand out. If the gate is original to a 1930s or 1940s home, we’ve probably done the same repair somewhere else in Highland Park. Bring us a photo or have us out to look, and we’ll tell you what’s possible and what it costs.
Usually not. On long Highland Park slide gates, triple-digit heat expands the steel panel enough to push it into the photocell beam or throw off the rack alignment. The control board is doing its job and stopping the gate before it hits something. We adjust the limit switches and rack seasonally so the gate clears the beam through the hottest part of the day. If the board ever does fail, we’ve got BFT, Linear, Viking, and Ghost Controls parts on the truck most days. Call and we’ll diagnose it on site.
We’re certified on BFT, Linear, Viking, Ghost Controls, and the full FAAC and Elite lineups that dominate custom estate work in Highland Park. We also service LiftMaster, DoorKing, and Mighty Mule. If your operator is older or has been through a few repairs elsewhere, we’ll do an honest assessment of whether it’s worth saving or whether a replacement makes more sense. Call (903) 829-4499 and we’ll look at exactly what’s on your gate.
Local Context: Why Highland Park Gate Work Is Different
Highland Park is one of the wealthiest incorporated towns in the country, and its gates reflect that. Almost every estate has a custom ornamental iron or powder-coated steel automated gate that was made for that specific driveway, not pulled off a rack. The permitting runs through the Town of Highland Park, not the City of Dallas, and that distinction trips up regional contractors every week. A Dallas gate company might weld a hinge post, write an invoice, and drive off without a permit. Two years later the homeowner is selling the house, the title search flags the unpermitted weld, and the fix costs more than the original repair. We pull the town permit when the work calls for it, and we put the 90-Day Done Right Promise in writing on every job. Hal Gatewood’s name is on the shop and on the invoice, and that’s the oldest accountability there is.
On Beverly Drive, a 1950s Georgian estate had an original wrought-iron swing gate that had sagged far enough the latch no longer caught. Our tech found the hinge post had racked out of plumb from black gumbo soil heave, not a failed weld. We dug out the post footing, reset it with deeper concrete, re-welded the hinge brackets, and re-aligned the FAAC operator limit switches, all under a Town of Highland Park permit that the previous Dallas contractor had never pulled. The gate closed square again, and the latch caught on the first try. That’s the difference between a weld and a repair done right.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park and the surrounding area since 2001.