Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Coppell?
Gate parts and welding repairs in Coppell typically range from $150 to $450 for standard onsite service, depending on whether you need a simple hinge adjustment or complex structural steel repair. Most homeowners in our area find that common issues, like a sagging gate or a broken latch, fall comfortably within the $200 to $350 range when handled by a professional who brings the welding shop directly to your driveway.
I am Hal Gatewood, and I have been fixing gates in this community since 2001. I do not believe in hauling your gate off to a shop or charging you for parts you do not need. If you are tired of national companies that quote one price over the phone and change it when they arrive, give me a call at (903) 829-4499. We provide upfront pricing, and I will be there myself to make sure the job gets done right the first time.
Gate Parts & Welding Cost Breakdown (2026)
Pricing for metalwork and gate components in Coppell reflects the cost of materials, specialized labor, and the equipment required to perform safe, on-site welding. Below is a breakdown of what you can expect to pay for common service items. Please remember that these are estimates for standard residential repairs.
- Hinge Reinforcement & Welding: $150 - $250. This usually involves addressing sagging gates by re-welding the hinge post or reinforcing the mount.
- Latch & Lock Repair/Replacement: $125 - $225. We often see latches misaligned due to soil shifting in the Coppell area, requiring adjustment or new welded hardware.
- Structural Steel Repair: $250 - $450. This covers patching rusted-out sections of steel tubing or fixing broken cross-members on driveway gates.
- Gate Opener Arm/Mount Adjustment: $175 - $300. If your motor is struggling because the mounting bracket has pulled loose, this requires precision welding to re-secure the base.
- Custom Fabrication/Modification: $300+. This varies significantly based on the complexity of the steelwork required for your specific gate design.
When you call us for Gate Parts & Welding in Coppell, you get a clear estimate before we strike an arc. We do not have hidden trip charges if you are inside the county, and we stand behind every repair with our 90-Day Done Right Promise. If the weld doesn’t hold or the gate starts dragging again within 90 days, I will come back and fix it. That is the accountability you get when you hire an owner-operated shop that has been in business for 29 years.
What Affects Gate Parts & Welding Pricing in Coppell
Understanding why a repair costs what it does helps you avoid the “cheap” bids that often lead to more expensive repairs later. Here is what I look at when I assess a gate:
- Soil Movement and Foundation: Coppell has clay-heavy soil that expands and contracts, causing gate posts to shift. If the post has moved, simply welding the hinge won’t fix the problem; we often have to adjust the entire geometry of the gate to compensate for the lean.
- Extent of Rust and Corrosion: If a gate is rusted through, I cannot weld to thin, pitted metal. I may need to cut out the damaged section and graft in new, solid steel, which takes more time and material than a simple patch.
- Gate Weight and Material: A heavy, ornamental wrought-iron gate requires significantly more structural support during a weld than a lightweight aluminum or chain-link frame. The heavier the gate, the more critical the penetration of the weld needs to be.
- Accessibility: If your gate is tucked into a tight landscaping corner or blocked by overgrown shrubs, it takes us longer to set up our welding equipment safely. We work on-site, so we need room to maneuver our gear.
- Hardware Quality: I use commercial-grade hinges and latches rather than the lightweight hardware often found at big-box stores. Using better parts upfront saves you from having to call me back in six months to fix a latch that snapped under the stress of daily use.
Safety is not a suggestion; it is a requirement. High-tension springs and heavy steel gates can cause serious injury if they fail during a repair. If your gate is falling or the operator arm is pulling away from the post, stay clear and call a professional. I have seen too many “DIY” repairs where someone used a standard home welder on a high-tension gate component, only for it to snap under the weight of the gate. Do not take that risk.
How to Save on Gate Parts & Welding
You do not need to overpay to get a professional, long-lasting repair. My goal is to keep your gate running smoothly for years, not just until I leave your driveway. Here is how you can keep costs manageable:
- Address Issues Early: A gate that is just starting to drag is a $150 hinge adjustment. If you wait until the gate collapses and tears the steel from the post, it becomes a $400 structural repair. Listen for squeaks or scraping sounds-they are warning signs.
- Take Advantage of Standing Offers: We offer $40 off any repair over $200. If you have been putting off that minor latch fix, bundle it with a hinge tune-up to hit that threshold and save.
- Use Our Free Second Opinion: If you have a written estimate from another company that seems high, show it to me. I provide free second opinions. If they are overcharging for unnecessary parts, I will tell you.
- Ask for Senior and Veteran Discounts: We are proud to support those who have served and our senior neighbors with a permanent 10% discount on repairs. Just let us know when you call.
- Clear the Area: If you can clear debris, pots, or landscaping away from the gate posts before we arrive, it speeds up the setup process, allowing us to focus entirely on the repair.
We are locally owned and owner-operated. You will not get a call center or a chatbot when you dial (903) 829-4499; you will get a live person who understands the urgency of a broken gate. If you are looking for someone who stands by his word and his work, contact us today.
FAQs - Gate Parts & Welding Cost
How much does it cost to fix a sagging gate in Coppell?
Fixing a sagging gate usually costs between $150 and $350, depending on whether the issue is a loose hinge or a shifted post. I will inspect the hinge and the post foundation to determine if we need to re-weld the mount or adjust the structural alignment to stop the drag.
Do you charge a trip fee for repairs in Coppell?
We do not charge a trip fee for repairs within the county. When you call us for Gate Parts & Welding services, the estimate we provide is the price you pay, with no surprise “dispatch” or “travel” fees added to your invoice.
Is it cheaper to repair or replace a damaged gate?
In most cases, repair is significantly cheaper than replacement, provided the integrity of the steel is still sound. I specialize in fixing the gates that other companies tell you to replace, often because they do not have the welding equipment or skill to perform on-site repairs. Call (903) 829-4499 for a free estimate-I will be honest about whether your gate can be saved.
Can you match parts for older gate brands?
Yes, we are certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate operator is older, we work to find compatible parts or perform custom fabrication to keep your existing system running safely.
How quickly can you fix a broken gate?
We prioritize repairs for homeowners who have lost security or access to their property. Because we are locally based and have been serving this area since 2001, we can often schedule your repair quickly. Call us to discuss your specific needs.
Pricing reflects the Coppell market as of 2026. Gatewood Fence & Gate offers free estimates - call (903) 829-4499.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coppell since 2001.
What Our Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo