Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
Gate installation in Keller runs $2,800 to $7,500 for a typical residential driveway gate with an operator, and most HOA-governed communities here require architectural approval before the first hole gets dug. If you live in Hidden Lakes, Marshall Ridge, or any of the larger-lot neighborhoods east of Rufe Snow, you already know the approval committee wants to see material, finish, and height specs before you commit. Call us at (903) 829-4499 and we’ll walk you through the whole thing, HOA paperwork included in the plan, not an afterthought.
Hal Gatewood has been setting gate posts in North Texas clay since 2001, and Keller’s soil is a particular animal. We anchor below the shrink-swell zone, use oversized footings, and sleeve every hinge post. A gate that starts square and stays square in Keller is a footing problem solved before it’s a hinge problem. That’s the difference between a gate you brag about and one you call us about in two years.
Why Gatewood Fence & Gate Is Keller’s Preferred Gate Installation Company
We’re locally owned, owner-operated, and our name goes on every invoice. No nationwide outfit, no dispatch board three states away. Hal Gatewood’s address and license number are published, and the person who answers your call at 2 a.m. isn’t reading a script. That matters in Keller, where word travels fast through HOAs and Nextdoor threads, and a bad gate install gets talked about at the Bear Creek Park dog park inside a week.
Our crews know Keller’s neighborhoods, not just its zip codes. We’ve worked on ornamental iron entries in the Timarron and Estates neighborhoods, tubular farm gates on the equestrian lots off Keller-Smithfield Road, and slide gates on the newer builds west of 377. The local knowledge isn’t a bullet point; it’s that we’ve already dealt with your HOA’s particular hang-ups or seen how the ground moves on your street. When we quote a gate installation in Keller, we quote it for Keller, not for a generic North Texas yard.
Every job carries our 90-Day Done Right Promise in writing. If it isn’t done right, one call brings us back, no runaround. We also answer the phone with a live person 24 hours a day, seven days a week. You won’t get a voicemail and a prayer that someone calls you back after the weekend.
Our Gate Installation Services in Keller
Here’s what we actually do in Keller, day in and day out. If what you need isn’t on this list, call anyway and ask. Hal would rather talk you through it than have you guess.
Driveway Gate
Driveway gates in Keller are often the first thing a visitor sees, which means HOA committees care about them more than nearly any other exterior feature. We install steel, iron, and tubular driveway gates sized for the wide concrete aprons common in Hidden Lakes and Marshall Ridge, and we coordinate the finish, height, and style with your community’s architectural standards before fabrication. You get a gate that clears the county and a first impression that doesn’t trigger a letter from the management company.
Pedestrian Gate
A pedestrian gate in Keller is rarely just a gate; it’s usually paired with an electronic latch tied into your driveway system, or it’s the shorter walk-through beside an automated double swing. We hang these with the same footing discipline as the big driveway gates because a leaning pedestrian panel on Blackland Prairie clay will rub its latch every season. We also match the picket spacing and top profile to your existing fence so it looks like it was always there.
Sliding Gate
Sliding gates work well on Keller properties where the driveway slopes toward the street or where the HOA won’t allow a swing arc over the sidewalk. We install cantilever and v-track slides with operators sized for the panel weight, and we pay particular attention to the roller track bed because Keller’s clay heave will buckle a shallow track in one wet spring. A sliding gate should roll with two fingers, not groan like a shipping container.
Swing Gate
Swing gates are the classic Keller look, especially the ornamental iron double swing entries in the larger estate neighborhoods. The caveat here is the hinge post. We set swing gate hinge posts in 48-inch footings with steel sleeves so the clay expansion and contraction doesn’t lean the post and make the gate bind against the latch. It costs more than a shallow post hole and a bag of Quikrete, and it’s the reason our swing gates still close true five years later.
Double Gate
Double gates in Keller usually mean either a wide ornamental iron driveway entry or a split rail gate on a larger lot. The failure we see most on doubles is one leaf sagging because its post moved and the other didn’t. We set both posts to the same depth, square the leaves against each other before the operators go on, and adjust the closing sequence so the overlap leaf never rakes the fixed leaf. With operators, we sync them so the panels don’t fight each other.
Security Gate
Security gates in Keller tend to be heavier, taller, and run by operators with more access control hardware on them. We install security gates with reinforced hinge posts, anti-lift brackets, and operators wired for keypads, remotes, and in some cases integration with an existing community entry system. We also respect UL 325 entrapment protection requirements, because a security gate that hurts someone is a lawsuit, not a deterrent. Photocells, contact edges, and proper force settings are standard on every automatic gate we hang.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We’re certified to service and install nine major gate operator brands, and in Keller we see a heavy run of LiftMaster and Viking on the residential side, with a fair number of Ghost Controls and DoorKing units on horse properties and smaller gated entries. We don’t push you toward one brand because it’s what’s on the truck. We match the operator to the gate weight, the usage, and the access setup you actually have, then install it so it doesn’t eat a gearbox every fourteen months. We keep common parts local, so a Keller repair or adjustment usually happens without waiting on a freight truck.
Common Gate Installation Problems We See in Keller Homes
- Hinge posts leaning from clay expansion. Keller’s Blackland Prairie soil swells when wet and shrinks when dry, and a shallow-set hinge post will lean enough in one season to make a swing gate sag and bind against the latch. We set posts below the shrink-swell zone and sleeve them so the gate stays square when the ground moves.
- HOA-mandated finishes rusting at the welds. Keller’s freeze-thaw cycles push moisture into powder coat seams and welded joints on ornamental iron, and a rust streak on a matte black gate is exactly what an HOA inspector flags. We prep and seal weld points before finishing, and we advise on coatings that hold up to North Texas ice and sun.
- Shared entry systems that refuse to talk to new operators. Keller’s gated communities often run existing loop detectors and resident keypad protocols, and a new operator installed without integrating those means a gate that opens for some people and not others. We match the operator controls to the community’s current access system so residents don’t get locked out on move-in day.
- Gates sized wrong for the opening. A gate that’s too wide for its hinge posts, or too tall for its operator, is a warranty claim waiting to happen. In Keller, where many driveway entries are wide enough for a trailer or a horse trailer, we measure the actual opening and the grade before anything is fabricated.
Pricing for Gate Installation in Keller, TX
You should know what a gate costs before you sit through an HOA meeting. In Keller, a single ornamental iron swing gate with a basic operator typically runs $2,800 to $4,500. A wider double swing gate in a Hidden Lakes or Marshall Ridge estate entry runs $4,000 to $7,500, depending on ironwork, operator choice, and whether we’re integrating keypads, photocells, and an existing community opener protocol. A basic tubular farm gate on an equestrian lot off Keller-Smithfield Road runs lower, usually $1,200 to $2,200 installed, with the operator quoted separately based on the gate’s weight and duty cycle.
What changes the number: the gate width and weight, the operator’s duty rating, whether we’re removing an old gate and its footings, and whether the HOA requires a specific finish or material that adds fabrication time. You’ll get a written price before any work starts, and that price is the price; there’s no on-the-door adjustment. We don’t charge a trip fee inside the county, and if you already have a written estimate from another company, bring it; Hal will give you a free second opinion. Seniors and veterans get 10% off, and any repair over $200 takes $40 off. Call (903) 829-4499 for a free estimate.
We Also Serve Cities Near Keller
Our Gate Installation team works throughout the North Tarrant and Northeast Tarrant corridor, so if you’re in North Richland Hills, Southlake, Colleyville, or Hurst, we’ll come out with the same upfront pricing and the same footing discipline. If you’re in Keller and wondering if your neighborhood is in our regular service loop, call and ask; the answer is almost always yes. We’re a Gate Installation in Keller crew first, but Keller’s neighbors see us too.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
Yes, in most of Keller’s master-planned communities, architectural approval is required before you install a driveway gate, and the committee typically wants to see the material, finish, height, and operator type before you dig. The process usually starts with a written application to your HOA’s architectural review committee, and we’ll help you put together the specs they’ll ask for. Call (903) 829-4499 and we’ll tell you exactly what Hidden Lakes, Marshall Ridge, or your specific community typically asks to see.
We set gate posts in oversized footings that reach below the shrink-swell zone of Keller’s Blackland Prairie clay, and we sleeve the hinge posts in steel to isolate them from the soil movement that leans shallow-set posts. This is the single biggest factor in whether a Keller swing gate still closes true after a few wet-dry seasons. It costs more than a shallow post hole, and it’s non-negotiable on our installs.
Yes, we regularly install operators and keypad systems that tie into Keller’s existing gated community entry protocols, including loop detectors, resident credential systems, and visitor call boxes. The key is matching the new operator’s control logic to what’s already buried in the driveway, and we test it before we leave. If your community uses a specific management company’s preferred access protocol, tell us upfront and we’ll coordinate with them.
UL 325 is the safety standard that governs automatic gate operators, and it mandates entrapment protection like photocells, contact edges, and proper force settings so a closing gate can’t crush a person or a vehicle. Any automatic gate operator we install in Keller meets UL 325 requirements, and we explain the protection devices on your gate in plain English before we finish. It’s not a marketing line; it’s the law, and it’s your liability if a gate gets installed without it.
Yes, Keller’s zoning means we work the same zip code on a $5,000 ornamental iron auto-swing gate in a Hidden Lakes subdivision and a basic tubular farm gate on a two-acre equestrian lot a few streets away. We’re set up for both, and we don’t treat the farm gate as a lesser job. The footing rules apply either way, because the clay under Keller doesn’t care what the gate looks like. Call (903) 829-4499 and tell us what you’re trying to contain, and we’ll quote it straight.
Call Gatewood Fence & Gate at (903) 829-4499 for a free estimate on gate installation in Keller. We’ll walk the site, check the grade and the ground, and give you a written price before anything gets built. Hal’s name is on the shop, the shop is down the road, and that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Keller and the surrounding North Texas communities since 2001.