Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plano
Gate installation in Plano means something specific here: most homes sit inside an HOA with hard rules on what can and can’t go up. We know that, because we’ve been doing this work in Plano long enough to have seen architectural boards reject a perfectly good gate over a one-shade-off powder coat. Gatewood Fence & Gate handles the approval, the engineering for Plano’s clay soil, and the install, start to finish. Hal Gatewood’s name is on the shop, he owns the company since 2001, and a live person answers when you call (903) 829-4499. If you’re in Plano and need a driveway gate, sidewalk gate, or a full security gate, we’ll come measure it and give you a written price before any work starts.
Why Gatewood Fence & Gate Is Plano’s Preferred Gate Installation Company
Plano is a city of master-planned communities, and the people who live there know that a gate is only as good as the post holding it and the board approving it. We’ve worked through both so many times that we can usually tell you, on the first visit, whether your HOA will flag a particular hinge style or finish. That’s not something a general contractor from outside the county is going to know. We drive these streets every day: Hedgcoxe, Legacy, the older pockets east of 75, the newer corners off Dallas North Tollway. We know what the clay does to a post here, and we know what the HOA committees say about it.
Our customers in Plano call us because we answer the phone with a person, not a voicemail. Hal runs a crew of background-checked, uniformed installers, but you can always reach him at the shop if something isn’t right. Every job gets the 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. No runaround. The estimate you get is the price you pay. We’ve been locally owned and owner-operated since 2001, with a published address and license number anyone can look up. That matters when you’re about to put a five-thousand-dollar gate in front of your home.
Our Gate Installation Services in Plano
We’re a full Gate Installation team, but in Plano the work breaks down into four service types most often. Here’s what we do and what we see in each.
Driveway Gate Installation
This is the big one. A driveway gate in Plano usually means tubular steel or ornamental iron between brick columns, a look that’s standard across the city’s subdivisions from the late 1970s through the mid-2000s. We spec the gate to your HOA’s approved material and finish, then set posts deep enough below the blackland clay shrink line so they stay true. A typical driveway gate install in Plano runs $3,800 to $8,600 depending on width, automation, and whether the existing brick columns are sound or need repair first.
Swing Gate Installation
Swing gates are the most common style in Plano because most posts here are set close to the garage, with a wide enough mouth for two cars. The weak point in this city is always the hinge post: blackland clay swells in spring rain and shrinks in summer heat, working the post loose within a season or two. We pour a deep footing below the shrink line and use a post that’s heavy enough for the swing radius. A swing gate in Plano runs $3,200 to $6,900 installed without automation.
Sliding Gate Installation
Sliding gates show up more in Plano’s older, narrower driveways, especially in 1980s-era East Plano homes where a swing gate would block the sidewalk or neighbor’s property line. Sliding gates need a proper track and a level run, and in Plano’s clay that means compacting a gravel base before anything goes vertical. We install sliding gates with steel track, roller stops, and a cantilever option if you don’t want a track crossing the driveway. Typical cost: $4,100 to $7,800.
Pedestrian Gate Installation
For the side yard, the walk path to the front door, or a garden entrance, a pedestrian gate needs to match the main gate’s finish or your HOA will want it redone. We build pedestrian gates from the same material spec, usually steel with a powder-coat that matches the Approved palette for your neighborhood. In Plano, these run $1,200 to $3,000 depending on height, style, and whether we’re hanging it on existing posts or setting new ones.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
If your gate has an operator, chances are it’s a LiftMaster, DoorKing, Elite, or Mighty Mule. We’re certified to work on nine major gate brands, those four included, plus FAAC, BFT, Linear, Viking, and Ghost Controls. Because we run so many Plano jobs, we stock common parts for LiftMaster and DoorKing operators locally, so we’re not waiting on a warehouse three states away when your gate won’t open on a Monday morning. On-site welding means we fix the steel in your driveway instead of hauling the gate back to a shop and leaving your entry open for a week.
Common Gate Installation Problems We See in Plano Homes
These show up again and again across Plano, and the fix is almost always about knowing the city, not just the gate.
- HOA architectural review rejects the gate after install. We see this most often when someone hired a general contractor who didn’t know Plano’s HOA boards. A gate that passes in Richardson or Frisco will get flagged here over a powder-coat color that’s one code off. We photograph everything, submit the right paperwork, and get approval before we cut steel.
- Clay soil heaves the hinge post out of plumb. Plano’s blackland prairie clay expands with spring rain and contracts under August heat. Posts set at a standard 24 or 30 inches will move within two seasons. We pour footings to 42 inches minimum, below the shrink line, so the post stays where we put it.
- First-generation gates at end of life. East Plano’s 1980s subdivisions still have plenty of original, non-automated tubular gates that are rusted through at the bottom rail and sagging at the hinge. Replacing those means matching the current HOA spec, which may have changed since the home was built. We handle that research for you.
- Winter ice events break operators and seize hardware. Uri in February 2021 was hard on Plano gates: hinges seized, grease cracked out of pivot bearings, and low-voltage boards on operators not spec’d for sustained freezing just quit. We install weather-rated control boards and proper hinge grease for this climate.
Pricing for Gate Installation in Plano, TX
Here are real numbers for the Plano market, quoted and agreed before work begins. A pedestrian gate runs $1,200 to $3,000. A swing gate runs $3,200 to $6,900. A driveway gate runs $3,800 to $8,600, and adding automation pushes that $800 to $2,400 higher depending on the operator. Sliding gates run $4,100 to $7,800. What moves the price in Plano: HOA-required finishes (some boards spec a specific powder-coat that costs more), whether your brick columns need mortar repair, and whether you’re adding keypad entry, loop detectors, or safety photocells. We give you a written estimate up front, no trip charge inside the county, and a free second opinion on any written estimate from another company. Call (903) 829-4499 and we’ll come measure.
We Also Serve Cities Near Plano
While this page is built for Gate Installation in Plano, our crew also works regularly in Coppell, Irving, Grapevine, and Flower Mound. If you’re just over the line from Plano, call and we’ll let you know the next day we have a crew in your area. Same pricing, same written estimate, same promise.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plano
In almost every Plano subdivision, yes. The city itself may not require it, but the HOA will, and the overwhelming majority of Plano neighborhoods are HOA-governed. You need written approval from the architectural review committee before we pour concrete or hang steel. We handle the submission, the photos, the spec sheet, and the follow-up. Approval material says exactly what gate style, height, finish, and hinge type are allowed. Call (903) 829-4499 and we’ll start the paperwork the same week.
We pour the post footing below the shrink line, which in Plano means 42 inches minimum, sometimes deeper if we hit clay pockets with unusual expansion. We also use a wider footing bell at the base and set posts in compacted gravel before the concrete goes in. That’s the difference between a gate that swings true for fifteen years and one that drags the latch side in two seasons. This is specific to Plano’s blackland prairie clay, and it’s the reason a generic install fails here so fast.
Yes, and we do it regularly in East Plano’s older subdivisions, where the driveways are often short with tight setbacks. The usual answer there is a cantilever sliding gate so you don’t need a track across the driveway. We compact a gravel base, set the support posts properly, and match the finish to whatever the HOA currently lists as approved, which may have changed since the home was built. Call for a measure and we’ll tell you exactly what will fit your entry.
Solar can work in Plano, but a solar opener on a driveway gate here needs two things: enough sun hours through the winter and a battery sized for cold snaps. Uri showed us that a lot of solar operators in Plano died not because the panel was weak, but because the low-voltage board froze. We recommend a hybrid AC-powered operator with battery backup for high-use driveway gates in Plano, using LiftMaster or DoorKing equipment we know holds up through freeze cycles. Call (903) 829-4499 and we’ll spec it for your specific exposure.
Yes. We install keypads, telephone entry, loop detectors, exit wands, safety photocells, and access control boards for single homes and for gated communities in Plano. For multi-resident entries we coordinate with your HOA or management company so the system matches what the architectural committee approved. We also service existing community gate systems when the board calls us in because the last company stopped returning their calls. Free estimate, written price, no surprises.
Getting Your Plano Gate Through HOA Review The First Time
Here’s the part generic gate installation pages don’t tell you. Plano is one of the most HOA-saturated cities in Texas, and the architectural review boards here enforce details other cities ignore. A gate that gets rubber-stamped in Richardson or Frisco can get rejected in Plano because the powder-coat color code doesn’t match the approved palette, or because the hinge style isn’t on the board’s list. We photograph every gate detail before we touch anything, submit the exact material spec and finish code the board expects, and wait for written approval before we pour concrete. In neighborhoods along Hedgcoxe Road or in Estates of Willow Bend, that’s not bureaucracy, it’s the difference between a gate that stands for twenty years and one you’re forced to tear out after six months.
We replaced a first-generation tubular steel swing gate on Hedgcoxe Road where the hinge post had heaved about three inches out of plumb from clay swell. The HOA there approved a specific bronze powder-coat and matching strap hinges. We poured a 42-inch post footing below the shrink line, installed a LiftMaster operator with a loop detector and safety photocells, and hung the new gate true. No sag correction needed once the post was right. That’s the Plano way to do it: solve the post, respect the board, and the gate takes care of itself.
Call Gatewood Fence & Gate for Honest Gate Installation in Plano
You can call (903) 829-4499 and talk to a live person, any hour, day or night. Hal Gatewood’s name is on the shop and on every invoice, and the shop is down the road, not three states away. We’ll come to your home in Plano, measure properly, check your HOA’s current spec if you have one, and give you a written price before any work starts. The job carries the 90-Day Done Right Promise, plainly, in writing, on every gate we install in Plano. If it’s not right, one call brings us back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Plano and the surrounding communities since 2001.