Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFAAC Gate Parts & Welding in Coppell: What to Know First
We provide independent FAAC gate parts and welding in Coppell, with most hinge, post, and rail repairs completed the same week we look at the gate. A typical FAAC hinge or weld repair in Coppell runs $175 to $650 depending on what’s actually failed, and you’ll get an upfront price before any work starts. We’re not affiliated with or authorized by FAAC. We’re an independent FAAC service provider, which means we answer to you, not a manufacturer’s warranty department. If you own a FAAC swing or slide gate and the hinge is sagging, a weld has cracked, or a post has shifted, call (903) 829-4499 to talk to a live person who can tell you straight what it’s going to take.
How FAAC Products Fail - and How We Fix Them
FAAC builds a solid operator, but the gate they’re attached to lives through everything Texas weather can throw at it. Here’s what we see repeatedly on FAAC gates around Coppell and how we handle each one.
- Hinge weld fatigue on the 415 swing-arm models. FAAC’s 415 and 412 operators are common on Coppell driveway swing gates. The operator is strong, which means it exerts real force on the gate hinge welds every cycle. Over five to eight years, the repeated torque cracks the weld at the hinge barrel. We grind out the old weld, re-weld with proper penetration, and check hinge alignment so the next weld isn’t fighting the opener.
- Post lean from clay soil and the C720 slide gate. Coppell sits on the Blackland Prairie. It’s clay that swells when wet and shrinks when dry. A C720 slide gate hanging on a post set in that soil will slowly lean, and the leaning post drags the gate off its rollers. We straighten or replace the post, set it below the frost line with proper concrete, and re-align the track so the FAAC motor isn’t straining against a gate that’s fighting the ground.
- Gate roller failure on FAAC slide systems. FAAC slide operators rely on the gate rolling freely. When the bottom rollers wear flat or seize, the operator’s current draw spikes and the board overheats. We replace rollers before they take out the motor. It’s a $150 fix that prevents a $700 board replacement.
- Partial-thickness cracks in ornamental gate frames. Most Coppell ornamental gates are mild steel with powder coat. The powder coat hides hairline cracks that form at stress risers, usually where pickets meet the top rail. On FAAC operators, the smooth start and stop cycles mask the problem until the crack propagates. We find them during inspections and weld them before you’re holding a broken gate at midnight.
- Latch and lock misalignment after hinge work. Once a gate is re-hung or re-welded, the original latch position rarely lands back exactly where it was. On FAAC systems with magnetic locks or bolt locks, that half-inch drift means the lock binds and the operator faults. We true the latch and lock plate to the new gate position, then cycle the opener to confirm the FAAC board reads a clean lock signal.
Our FAAC Gate Parts & Welding Process
This is how a FAAC repair goes at our shop, from the first phone call to the last weld.
- 1
You call (903) 829-4499 and describe what the gate’s doing. A live person answers. We ask questions about the symptoms, the gate type, and the FAAC model you have.
- 2
We come out and look at the whole gate, not just the broken part. A sagging gate is rarely just a hinge problem. We check the posts, the frame, the roller tracks, and the operator’s limit settings before touching a single weld.
- 3
We give you an upfront price before any work starts. You’ll know the number, and it won’t change at the door. We also tell you if an OEM FAAC part or a quality aftermarket equivalent is the better call for your situation.
- 4
We weld on site in Coppell. The gate stays in your driveway. We don’t haul it off to a shop, and we don’t swap parts that don’t need swapping. If a hinge is salvageable, we fix it. If it’s not, we replace it.
- 5
We test the gate under the FAAC operator after every repair. Full open and close cycles, plus a check that the safety inputs and limit switches read clean. If the operator was working hard before, it should run easier after.
- 6
You get the 90-Day Done Right Promise in writing. If the repair isn’t right, one call brings us back at no charge. That’s the deal, plainly stated.
What FAAC Gate Parts & Welding Costs in Coppell
Prices in Coppell run close to the Dallas-Fort Worth average, with a little extra labor on jobs where the clay soil has done structural damage. The ranges below reflect what we’ve charged for common FAAC repairs around town.
- Hinge replacement (single gate): $175 to $350, including realigning the gate and cycling the FAAC opener.
- Post replacement with concrete reset: $350 to $800, depending on post size and whether the opener wiring needs re-run.
- Weld repair on cracked frame or hinge: $150 to $500, based on crack length, access, and whether the gate needs to come off its hinges for a clean weld.
- Roller replacement and track realignment: $150 to $400 on FAAC slide gates.
- Latch and lock realignment: $100 to $250, including operator cycle testing.
What moves the price: whether the gate needs to come off its hinges, how much concrete work the post needs, and whether you want OEM FAAC parts or a quality aftermarket equivalent. Call (903) 829-4499 for a free estimate. We’ll give you the number before any work starts, and there’s no trip charge inside the county.
Why Coppell Homeowners Call Gatewood Fence & Gate for FAAC Work
Tell me what it’s doing wrong and I’ll tell you what it’s going to take, no runaround. That’s the whole philosophy. Hal Gatewood grew up about a mile from Old Town Coppell and has been working gates in this area since 2001, when he decided he’d rather fix things with his hands than sit in an office. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Every FAAC job we do is covered by our 90-Day Done Right Promise, in writing. If it’s not done right, we make it right. We weld on site in Coppell, we answer the phone with a live person 24/7, and we price every job before we start. We’re not a call center three states away, and we’re not going to send someone in a branded van who’s never touched a FAAC operator. If your FAAC gate needs work and the operator is beyond saving, we also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing. We’ll tell you straight what makes sense to repair and what genuinely needs replacing.
FAQs
We can source OEM FAAC parts for most models, including the 400 and C720 series, but we’ll also recommend quality aftermarket parts when they’re the better value. The honest truth is that many FAAC gate failures aren’t operator problems at all, they’re hinge, weld, or roller problems that don’t require FAAC-branded parts. If you’re under warranty, we’ll tell you to go through FAAC’s authorized channel so you don’t void it. If you’re out of warranty, we’ll find you the right part at a fair price. Call (903) 829-4499 and we’ll walk you through the options.
We schedule most Coppell FAAC repairs within a few days of your call. If the gate is stuck open or stuck closed and it’s a safety issue, call (903) 829-4499 anytime, day or night, and a live person will answer and get you on the schedule. We don’t promise same-day service on parts that need ordering, but we do everything we can to make the repair happen the same week we see the gate.
Yes, and that’s a big part of our business. Hal has found gates held together with zip ties, gates with the operator burning out because the post had shifted half an inch, and gates marked for replacement that only needed a proper weld and a roller swap. We’ll give you a free second opinion on any written estimate. Show me the gate closing on its own and I’ll show you where it’s failing. If it genuinely needs replacing, we’ll tell you that too. Call (903) 829-4499 to set up a look.
If your FAAC operator is under manufacturer warranty, we’ll advise you to go through FAAC’s authorized channel for operator-level failures. But most of the welding we do is on the gate itself, the hinges, the posts, and the frame, which are outside the FAAC operator warranty anyway. We’ll walk you through what’s covered and what isn’t before we touch anything.
That’s almost always a roller or track problem, not an operator problem. On FAAC slide gates, the operator assumes the gate rolls true. When a roller seizes or the track shifts, the FAAC board sees the resistance and faults. We replace the rollers, re-level the track, and cycle the operator to confirm it’s reading clean. That fix typically runs $150 to $400 in Coppell. Call (903) 829-4499 and describe what the gate is doing and Hal can usually tell you over the phone what you’re looking at.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate - Coppell, TX at Gatewood Fence & Gate, serving Coppell and nearby areas.