Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Irving
Gate access control in Irving means entry keypads, card readers, phone entry, and video intercoms wired to automatic gate operators, and most of the work we do here runs through HOAs and management companies in Las Colinas first, single-family driveways second. In Irving, you’re usually dealing with a system the HOA owns, which means any change to the panel, the reader, or the opener has to clear architectural review before the first wire gets pulled. We know that process cold. Hal Gatewood has been fixing gates around Dallas-Fort Worth since 2001, and when you call (903) 829-4499, a live person picks up. We serve Gate Access Control in Irving from our DFW office with crews on the ground in Irving every week.
Key Takeaways
- Most gate access control work in Irving lives inside HOA-governed communities, especially along the SH-114 and MacArthur Boulevard corridor in Las Colinas, so architectural approval comes before any panel swap or opener change.
- Irving’s expansive black-clay soil moves gate posts faster than almost any other condition we see in DFW; a sagging swing gate off MacArthur is rarely a hinge problem, it’s a footing problem.
- We coordinate directly with HOA management companies, match ornamental iron finishes to the original spec, and handle entrapment protection compliance (UL 325) on every job.
- Keypad and card reader replacements in Irving typically run $180 to $650 installed; full video intercom integration at a community gate starts around $1,200 and goes up from there.
- The price is quoted and agreed before any work starts. Phone entry, card reader, keypad, intercom: every quote is written, and every job carries our 90-Day Done Right Promise in writing.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Access Control Company
We’re a local, owner-operated shop, and Hal Gatewood’s name is on every invoice. That matters in Irving because most access control work here is commercial-grade equipment serving HOA entrances, and the person who shows up needs to be able to talk to a property manager, explain why a FAAC operator faulted, and weld a post back into square in the same visit. Hal has been at this since 2001. His crew does on-site welding in the driveway or at the community entrance, which means a bent or heaved post doesn’t turn into a two-week “we’ll haul it to the shop” runaround.
Irving customers call us for two reasons, mostly. The first is that the gate stopped reading keypads after a storm, and the HOA is on them to fix it before the next board meeting. The second is that a national outfit quoted one thing on the phone and charged another at the door. We don’t do that. The price you agree to is the price on the invoice. We put our 90-Day Done Right Promise in writing on every job, and senior and veterans get a permanent 10% discount, with no trip charge inside the county.
Our Gate Access Control Services in Irving
If you need gate access control work in Irving, you’re probably dealing with one of these four systems. Here’s what each one looks like around here, and what we actually do about it.
Card Reader Access
Card readers are the backbone of access control at Las Colinas community entrances, where residents badge through the same gate every morning. We wire and program proximity and RFID readers to work with existing FAAC and DoorKing operators, and we integrate them with existing reader databases so a new card works the same day. In Irving’s summer sun, we also see reader housings crack from UV after a decade of Texas heat; when we replace one, we swap in a sealed, weather-rated enclosure instead of bolting on another plastic shell that’ll fail the same way.
Video Intercom
Video intercoms in Irving serve two masters: the HOA entrance on one side and the resident’s phone on the other. We install and service hardwired and IP-based intercoms, including models that place a video call to a resident’s smartphone when a delivery driver pulls up. At Las Colinas properties near the Mandalay Canal, condensation from the water features accelerates corrosion on outdoor intercom housings; we refinish and reseal those rather than pretending a quick wipe-down will hold.
Keypad Entry
Keypads are the simplest entry point on most Irving gates, and they fail for simple reasons: cracked faceplates, worn buttons, sun-baked wire insulation, and ground loops from bad panel grounding. We stock common Linear and BFT keypad models locally, so a replacement rarely waits on a parts truck. If your community uses a wireless keypad at a slide gate off MacArthur, we tune the receiver range so it works from a car window without picking up stray signals from the office park next door.
Phone Entry Systems
Phone entry means a visitor presses a button at the gate and the system calls your landline or cell. In Irving’s older North and West Irving subdivisions, we still see plenty of wired telephone-entry panels on 1970s-era swing gates, and they often fail from corroded relay contacts, not from anything complicated. We replace the relay, restore dial-tone wiring, and we do not tell you to replace a perfectly good operator just because the access panel died. If the community wants to go cellular, we can convert the panel without ripping out existing conduit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
Our Gate Access Control team is certified to service nine major gate brands, and in Irving we see BFT, Linear, and Viking on more pedestals than anything else. We also carry Ghost Controls parts for residential retrofits, and we keep common boards and receivers on the truck so a Las Colinas call isn’t waiting on a two-day ship. If your community runs FAAC or DoorKing hydraulics at the entrance, we service those too, and we coordinate with your management company on maintenance windows that don’t leave the gate dead during morning rush.
Common Gate Access Control Problems We See in Irving Homes
- Keypads that stop reading after rain. North Texas storms dump water into conduit bodies that were sealed with tape ten years ago. Moisture gets into the wiring, phantom button presses start, and the HOA gets complaints. We pull the panel, dry the whip, seal the conduit body properly, and the problem stays fixed.
- Slide gates that drag or trip the safety photocell. High-traffic HOA entrances in Las Colinas run slide gates thousands of cycles a year. Rack and pinion wear plus accumulated fine dust from the SH-114 corridor throw the gate slightly out of square, the photocell beam misaligns, and the gate reverses mid-open. Fix the rack, realign the cell, and recalibrate the loop detector.
- Card readers that work for six months, then quit. Intense Irving sun cooks the cheap electrolytic capacitors in older reader power supplies. The symptom is intermittent reads or a reader that only works in the morning. We repower the reader with an industrial supply rated for 140-degree ambient, and the problem stays gone.
- Swing gate posts that heave after a wet winter. Irving’s expansive black clay swells when it rains and shrinks in drought, and a footing poured shallow in 1980 will move. The gate still reads the keypad fine, but the hinges bind and the opener stalls. That’s a post reset and hinge realignment job, and we do it on site.
HOA Access Control in Las Colinas: The Architectural Approval Reality
The Las Colinas district along SH-114 and MacArthur Boulevard has one of the highest densities of HOA-owned commercial-grade slide gate operators in the entire DFW metroplex. Many of those installations run FAAC or DoorKing hydraulic operators tied to card-reader and video intercom systems. That means gate access control work here often requires coordinating with an HOA management company and matching architectural standards, rather than just swapping a residential opener and driving off. If the association’s design guidelines call for a specific keypad finish or post color, the part has to match, or the board will bounce it. We’ve done enough of these jobs to know which management companies want photos before work starts and which ones want a board vote before the curb cut gets touched.
Last month our crew reset the post footing on a sagging swing gate at a Las Colinas community off MacArthur Boulevard after the hinge post heaved out of plumb from black-clay soil movement. We coordinated with the management company to match the original ornamental iron finish, realigned the chain-driven FAAC operator, and reinstalled the safety photocell and loop detector so the gate meets UL 325 entrapment protection. That’s the shape of access control work in Irving: the electronics are often the easy part; the post, the dirt under it, and the board’s approval are the job.
Pricing for Gate Access Control in Irving, TX
You’ll want real numbers. In Irving, a keypad replacement for an HOA entrance typically runs $180 to $450 installed, depending on whether we’re swapping the keypad only or rewiring through the conduit body. A card reader install or replacement runs $220 to $650 including programming and integration with the existing database. Phone entry systems start around $300 for a wired panel repair and go to $1,100 for a full cellular-capable replacement. Video intercom integration at a community gate starts at $1,200 and climbs with camera count and whether the HOA wants smartphone app support. Slide gate rack replacement with realignment runs $400 to $900, and a post reset with concrete footing in Irving’s clay typically lands between $400 and $800 for community gates, more when a camera pedestal is involved. Every quote is written, the price is agreed before any work starts, and the promise is in writing.
| Access Control Job | Typical Irving Range |
|---|---|
| Keypad replacement (HOA entrance) | $180 - $450 |
| Card reader install or swap | $220 - $650 |
| Phone entry panel repair | $300 - $700 |
| Full video intercom integration | $1,200 - $3,500+ |
| Slide gate rack replacement + realign | $400 - $900 |
| Post reset with concrete footing | $400 - $800+ |
Why Irving’s Soil Keeps Calling Us Back to the Same Communities
The same expansive North Texas black-clay soil that shifts foundations and cracks walls across the DFW metroplex also destabilizes gate posts throughout Irving. Posts heave, lean, and go out of plumb as soil moisture swings between summer drought and seasonal rains. In Irving, that means hinge realignment and concrete post-resetting are recurring repair needs even on installations only a few years old. A gate that reads every keypad perfectly but drags on the ground is usually a footing problem, not an access control problem. The hinge post moved; the panel didn’t. If a repair crew only checks the electronics, you’ll be back on the phone in six months.
Around the Mandalay Canal, the decorative water features create localized humidity pockets that accelerate rust and pitting on ornamental iron scrollwork noticeably faster than in the drier flatland neighborhoods just a few miles west. In practice, a Las Colinas gate access control job often includes rust treatment, spot priming, and repainting on the gate frame behind the keypad panel, because moisture rusts the mounting surface faster than it rusts the electronics. A shop in Grand Prairie might never see that on a gate younger than twenty years; in Irving we see it on gates installed in 1999.
We Also Serve Cities Near Irving
While this page is for Irving homeowners and HOAs, our crews regularly run access control jobs in Coppell, Euless, Plano, and Grapevine. The soil conditions are similar across the county line, and our parts trucks carry the same Linear, BFT, and Viking stock no matter which parking lot we’re parked in.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Irving
Yes, if your property falls under an HOA with architectural review, which covers nearly every Las Colinas community and most newer Irving subdivisions. The approval requirement typically includes the gate style, height, finish, and any visible access control equipment, including keypad colors and intercom housings. We help you get the paperwork straight. We’ve matched ornamental iron finishes to the original spec dozens of times and we can provide the cut sheets and product photos the board wants before voting. Don’t install first and ask later; boards love to make people undo work. Call (903) 829-4499 and we’ll help you prep the submittal.
Because Irving sits on expansive black clay, and unless the footing is deep enough and the post is reset with proper concrete, the soil will keep moving it. When wet clay swells and dry clay shrinks, a shallow footing goes out of plumb. The right fix is a deeper footing with compacted, well-drained backfill, not just shimming the hinge. We do this on site, with welding, so your gate stays in the driveway. If a previous company did a “repair” without touching the footing, the post wasn’t fixed; it was adjusted. Call us for a second opinion, free, on any written estimate you already have.
Yes, and most Las Colinas communities run operator models we already know. We integrate phone entry and video intercom panels with FAAC and DoorKing operators every month along MacArthur Boulevard. The work involves wiring the new panel to the operator’s open command inputs, programming the relay logic, and syncing the resident call list. We test the full sequence end to end before we call it done. If your board wants smartphone app access via the intercom, we can recommend equipment that works with your existing operator rather than forcing a full operator replacement.
UL 325 compliance is the standard for automatic gates in Irving, which means working safety photocells or contact edges and proper loop detector function. Any gate operator we service gets its entrapment protection tested. If a photocell is misaligned or a loop doesn’t detect a car sitting on it, we repair that before we call the job complete. This isn’t optional extras; it’s what keeps a gate from closing on a person. In high-traffic HOA entrances along SH-114, we see photocell misalignment after rack and pinion wear, and we realign and test each time.
It does, and it shows up as corrosion on ornamental iron and on gate panel mounting surfaces faster than in the flatter neighborhoods west of Las Colinas. The water features push localized humidity into the air around adjacent gates, which accelerates rust on scrollwork and pits the metal behind keypad enclosures. On canal-adjacent jobs we treat the rust, spot-prime the mounting surface, and seal the panel gasket before fitting the new access equipment. If the panel is mounted to a rusted plate, the new keypad will wiggle loose in a year. Call (903) 829-4499 for a free estimate on access control work anywhere in Irving.
Contact Gatewood Fence & Gate for Gate Access Control in Irving
If your gate keypad is failing, your card reader is half-dead, or your HOA wants a video intercom upgrade, call Hal Gatewood and his crew at (903) 829-4499. We answer live, we show up in the window we promise, and the price is written down and agreed before any work starts. Senior and veteran? Take 10% off. Repair over $200? Take $40 off. The name on the shop is the name on the invoice. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving since the company’s founding in 2001.