Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElectric Gate Repair in Coppell, TX
Electric gate repair in Coppell typically costs between $150 and $500, with most common issues like sensor misalignment or control board glitches resolved for the lower end of that range. For a detailed breakdown, see our guide on How Much Does Gate Repair Cost? (2026 Price Guide) - Coppell, TX. We provide same-day service for urgent gate failures, ensuring your property remains secure without you having to wait days for a technician. If you need immediate assistance, call us at (903) 829-4499 for a free estimate.
When an electric gate stops working, it is often a matter of wear and tear rather than a total system failure. Many homeowners in Coppell assume they need a brand-new opener when, in reality, a simple adjustment to the limit switches or a cleaning of the photo-eye sensors is all it takes to get things moving again. At Gatewood Fence & Gate, we prefer to fix what you have through our Gate Repair services. I have been in this business since 2001, and I know that most manufacturers build these motors to last if they are maintained correctly. My goal is to save you the expense of a full replacement whenever a repair is a viable, safe option.
Whether you are dealing with a gate that stops halfway, one that won’t open during a storm, or a system that makes a grinding noise, we handle the full range of electric gate services. We are not a dispatch service; we are a locally owned shop, and we treat your gate as if it were on our own property. You can learn more about our general Gate Repair in Coppell services here, or head back to our home page to see our full list of offerings.
When You Need Electric Gate Repair
Electric gates in Coppell deal with a lot of stress. Between the summer heat that bakes electronic components and the occasional heavy rain, gate motors often struggle and may need Gate Realignment. You should call us when you notice these specific warning signs:
- The gate reverses suddenly: If your gate starts to close and then immediately pops back open without hitting anything, your photo-eye sensors are likely misaligned or dirty. This is a common issue in our area where debris or spiderwebs can block the beam.
- Grinding or screeching noises: If you hear metal-on-metal sounds, it usually means the gears inside the motor housing are worn or the chain is rubbing against the frame. This requires immediate attention before the gear assembly strips completely.
- Gate won’t open with the remote: This could be a dead battery, but if fresh batteries do not solve it, you may have a failed receiver or a blown fuse on the control board.
- The gate is sluggish or slow: A gate that moves significantly slower than it used to often indicates a failing capacitor or a motor that is struggling against a dragging hinge post.
- The gate is stuck open or closed: If the gate is completely unresponsive, you may need a manual release to get your car out, but please be careful, as heavy gates can be dangerous if the release mechanism is damaged.
Safety Warning: Electric gates use high-voltage electricity and heavy, high-tension components. If you see frayed wires, smell burning plastic near the control box, or notice a gate arm that has come loose, do not attempt to force it. These systems can crush or pinch fingers and limbs. If you are unsure, turn off the power at the breaker and call us immediately.
Our Electric Gate Repair Process
I have built my reputation on being the guy who shows up and does the job right the first time. We do not believe in “patching” a problem just to get out the door. We follow a strict process to ensure your gate operates safely and reliably for the long haul.
- On-Site Diagnosis: I come to your property in Coppell to look at the gate. I do not guess over the phone. I look at the hinges, the motor, the chain, and the electronics to see exactly where the failure is starting.
- Component Testing: We test the voltage at the board and check the amperage draw on the motor. We often find that a $50 part is the culprit while other companies might try to sell you a $1,500 motor.
- On-Site Welding and Mechanical Repair: If the issue is a broken hinge or a saggy post, we perform the welding right there in your driveway. We don’t haul your gate off to a shop unless it is absolutely necessary, which saves you time and money.
- Calibration and Safety Check: Once the mechanical and electrical work is done, we calibrate the limit switches and test the obstruction sensors multiple times. We verify that the gate stops and reverses exactly as it should when it hits an object.
- The 90-Day Done Right Promise: Every repair is backed by our written 90-Day Done Right Promise. If the same issue pops up within 90 days, I come back and make it right. No runaround, no excuses.
Electric Gate Repair Pricing in Coppell
We believe in upfront pricing. You will never be surprised by a bill when we are finished. While every gate is different, these are the typical ranges for common repairs in the Coppell area.
- Sensor Alignment and Cleaning: $150 - $225. This covers the labor to clean, realign, and test safety photo-eyes.
- Control Board or Relay Replacement: $300 - $600. This depends on the brand of your opener, such as LiftMaster, DoorKing, or Mighty Mule.
- Motor Gear Assembly Repair: $450 - $850. This is labor-intensive and involves replacing stripped internal gears that drive the gate.
- Hinge Welding and Fabrication: $200 - $500. Depending on the size of the gate and the extent of the rust or structural damage.
We offer a $40 discount on any repair over $200. We also provide a free second opinion on any written estimate you have received from another company. If you are a senior or a veteran, ask about our permanent 10% discount. We do not charge a trip fee inside the county. Call (903) 829-4499 to get an exact quote for your specific gate.
FAQs - Electric Gate Repair
Is it cheaper to repair or replace my electric gate motor?
In most cases, repairing the motor is significantly cheaper, especially if the issue is a circuit board, capacitor, or sensor, which typically cost a fraction of a full system replacement. We only recommend replacing the motor if the internal gears are completely destroyed or if the unit is so old that parts are no longer manufactured, which is rare for quality brands like Elite or Viking.
Can you fix my gate on the same day?
We understand that a broken gate is a security risk, so we prioritize urgent repairs and often provide Gate Repair Near Me in Coppell, TX with same-day service. Call (903) 829-4499 as early in the day as possible so we can work you into the schedule.
Do I need to be home for the repair?
For most electric gate repairs, we do not require you to be home as long as we have access to the gate motor and the power source. However, we prefer you to be there for the final testing so we can show you that the gate is operating correctly and explain exactly what we fixed.
Can you work on my specific gate brand?
We are certified and experienced with nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate is a standard residential or light commercial model, we have the experience to repair it. Call us with your brand name, and we can confirm if we have the parts on hand.
If you are tired of dealing with gate companies that charge high dispatch fees and never show up on time, give us a call. I have been serving this community since 2001, and I answer my own phone. We show up when we say we will, we fix the problem, and we stand behind our work. Call (903) 829-4499 today for a free estimate and let us get your gate moving again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coppell.