Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Coppell Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls in Coppell, from Old Coppell to the Northlake Woodlands subdivisions, and we work on these openers every week. Most of our Ghost Controls calls involve solar underperformance, control boards that took a surge hit, or remotes that stopped pairing after a storm. We’re not affiliated with or authorized by Ghost Controls, but that independence means we repair boards other companies won’t touch and source discontinued parts they can’t find. Call (903) 829-4499 and you’ll get a live person, not a voicemail.
Coppell sits on Blackland Prairie clay that heaves with every wet-dry cycle, and the automated gates installed during the city’s big 1990s and early 2000s build-out are hitting the end of their operator life all at once. Ghost Controls units show up regularly on those older HOA-governed properties, especially where cedar and ornamental iron gates were the standard. When those systems fail, Coppell homeowners need someone who knows the exact failure modes and fixes them right the first time.
Why Trust Gatewood Fence & Gate for Your Ghost Controls Gate Repair?
Hal Gatewood grew up about a mile from Old Town Coppell and has been working gates in this area since 2001, when he decided he’d rather fix things with his hands than sit in an office. He picked up trade fundamentals at Tarrant County College’s vocational program, then learned the rest on job sites dealing with Texas heat and gates that hadn’t seen a wrench in fifteen years. These days most folks around Coppell know him as the guy who shows up on time, tells you straight what’s wrong, and doesn’t charge you for parts you don’t need. He’s got a short fuse for anyone who installs a gate operator without properly setting the limit switches.
Our crew works on Ghost Controls TSS1, TSS1XP, AXDP, AXD, and DTP1 systems regularly. That matters because Ghost Controls uses proprietary control boards and limit switches, and a tech who only sees these units once a year will misdiagnose them. We see the same failures repeat across Coppell’s HOA-heavy neighborhoods: surge-fried relays, solar panels that underperform in shaded north-facing installs, and gearboxes seeping on older TSS1 units. When we show up, we already know what to look for. The person who answers the phone is the person who’ll be in your driveway.
Common Ghost Controls Gate Repair Problems We Fix in Coppell
- Control board failure from power surges on AXDP and TSS1 systems. North Texas thunderstorms dump lightning strikes that travel through gate wiring and fuse relays. We see AXDP boards with dead open or close relays after a single storm, especially on properties without surge protectors. Coppell’s 2021 ice storm caused the same damage through grid fluctuations, and we’re still replacing boards from that event.
- Solar panel underperformance draining batteries on TSS1 and TSS1XP units. Ghost Controls solar gate openers depend on clean panel output, but Coppell’s mature tree canopy and north-facing fence lines starve these systems. A TSS1 with a 10W panel in partial shade will run the battery down within weeks, and the opener starts beeping but won’t move. We diagnose panel angle, shading, and battery health, then correct the setup.
- Remote receiver failure or range loss. The receiver boards on Ghost Controls openers corrode over time, especially with Coppell’s humidity swings. Antennas get snapped by tree branches or lawn equipment. A remote that only works from ten feet away usually means receiver degradation, not a weak remote battery.
- Gearbox seepage on older TSS1 units. The gearbox seals on first-generation Ghost Controls TSS1 openers harden and crack after a decade of Texas heat. Oil seeps out, friction increases, and the gate travels slower and slower until it stalls mid-cycle. We catch this early when possible and replace seals before the gearbox eats itself.
- Limit switch drift causing gates to stop short or over-travel. Ghost Controls openers rely on precise limit switch calibration. Coppell’s clay soil shifts gate posts slightly, which throws off travel distance. The gate starts slamming into the stop or reversing before it fully closes. We recalibrate and, when the post has moved enough to matter, address the footing too.
Ghost Controls Parts & Our Repair-vs-Replace Approach
We use genuine Ghost Controls OEM parts when they’re available because the control boards, limit switches, and receiver modules are proprietary. You can’t swap a generic board into a TSS1XP and expect it to communicate with the solar charge controller correctly. When Ghost Controls discontinues a part or backorders stretch into months, we source quality aftermarket equivalents from suppliers we’ve vetted over years, and we tell you plainly what you’re getting and why.
Here’s how we decide repair versus replace: if your Ghost Controls opener is under eight years old and the failure is a single component, we repair. If the unit is fifteen years old with a fried board, a seeping gearbox, and a dying battery, we’ll show you the math on replacement versus pouring money into a system nearing end of life. We don’t upcharge parts and we don’t recommend work you don’t need. Tell me what it’s doing wrong and I’ll tell you what it’s going to take - no runaround. Call (903) 829-4499 and we’ll walk through it.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis on site. We check the control board for relay damage, test the solar panel output and battery voltage, inspect the gearbox for seepage, and verify limit switch calibration. On TSS1 systems we look specifically at the solar charge controller and its connection points. On AXDP units we check the receiver board for corrosion.
- 2
Upfront price, before any work starts. We quote the repair in writing at your driveway. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. The price you hear is the price on the invoice.
- 3
Repair with the right parts. We install OEM Ghost Controls components where they matter, recalibrate limit switches, and pair remotes to the receiver. If you have an HOA aesthetic requirement on your gate itself, we’ll work with what’s approved. Most Ghost Controls opener repairs happen same-day.
- 4
Testing and adjustment. We cycle the gate through open and close multiple times, check the obstruction detection and auto-close timing, and verify remote range from the street and inside your vehicle. We test the system under load, not just on a bench.
- 5
90-Day Done Right Promise, in writing. If something we fixed isn’t right within 90 days, one call brings us back. No runaround, no fine print.
Ghost Controls Products We Service & Install in Coppell
We work on the full Ghost Controls residential swing gate lineup: TSS1 and TSS1XP heavy-duty solar openers, AXDP and AXD automatic gate opener kits, DTP1 dual swing gate systems, and ABBT2 battery backup and solar add-on systems. We stock common OEM components locally including control boards for TSS1 and AXDP units, receiver modules, remote transmitters, and hardware kits, so most Coppell repairs don’t wait on shipping. We also install new Ghost Controls openers when your gate warrants a fresh start.
We Also Service These Brands
Ghost Controls isn’t the only name we know. Gatewood Fence & Gate services nine major brands for Gate Repair across Coppell and Denton County, including LiftMaster, Mighty Mule, and DoorKing. If your community has mixed-brand gates or you’re switching from an older LiftMaster to a Ghost Controls unit, we handle both sides of that job.
FAQs - Ghost Controls Gate Repair Service in Coppell
No, we’re an independent Ghost Controls service provider. We’re not affiliated with or authorized by the manufacturer. What that means for you is straightforward: we repair boards other companies won’t touch and we source discontinued parts through independent channels. We’ve been doing this since 2001 and our work carries the 90-Day Done Right Promise in writing.
Yes, whenever they’re available. Ghost Controls control boards, limit switches, and receiver modules are proprietary, and aftermarket substitutions often cause compatibility headaches. When OEM parts are discontinued or on backorder, we source quality aftermarket equivalents and tell you exactly what you’re getting before we install anything. You’ll never pay for a part you didn’t approve.
Most Ghost Controls repair in Southlake and Coppell opener repairs are completed same-day, especially control board replacements, receiver fixes, and limit switch recalibration. Solar panel upgrades and gearbox seal replacements may take a second visit if parts need to come in. We’ll tell you the timeline when you call (903) 829-4499, and the price is locked before we start.
We service and install the full Ghost Controls residential lineup: TSS1 and TSS1XP solar swing gate openers, AXDP and AXD automatic gate kits, DTP1 dual swing systems, and ABBT2 battery backup and solar add-ons. If your Coppell property has an older first-generation TSS1 with a seeping gearbox or an AXDP board that got hit by a surge, we’ve seen it and fixed it.
If your Ghost Controls opener is still under manufacturer warranty, using independent service won’t void that warranty. The Magnuson-Moss Warranty Act protects your right to service outside the manufacturer. We use OEM parts when available and we document our work, so if you need to file a warranty claim, you’ll have a clear service history.
Ghost Controls control board replacement typically runs $250 to $450 depending on the model and part availability. Receiver module fixes range from $150 to $280. Solar panel and battery upgrades for TSS1 systems run $200 to $400 installed. Limit switch recalibration is often under $150. These are real Coppell ranges, not phone quotes that change at the door, and we also offer Ghost Controls service in Plano. Call (903) 829-4499 for an exact quote - estimates are free, and we stand behind the number.
That beeping is the battery voltage warning, and it usually means the solar panel isn’t producing enough current to charge the battery. In Coppell, shaded or north-facing panel placement is the most common cause. We check the panel angle, wiring, charge controller, and battery condition, then correct the setup so the system actually charges. Call (903) 829-4499 and we’ll diagnose it over the phone first.
Yes. A lightning strike often damages the receiver board while leaving the control board functional. We test the receiver independently, and if it’s dead, we replace the receiver module and pair your existing remotes back to the system. We diagnosed a TSS1XP in Coppell that would open but not close because the close relay fused after a storm surge. The fix was a new surge protector, an OEM control board, recalibrated limit switches, and two paired remotes. The homeowner added a second 10W solar panel while we were there.
Dual gate systems are designed to close one leaf before the other - that’s normal sequencing to prevent the gates from binding at the center. If the delay is excessive or one leaf is dragging, the issue is usually a limit switch that’s out of calibration or a hinge binding on one side. Coppell’s clay soil shifts posts and throws off that timing. We recalibrate both actuators so the sequence is tight and the gate closes smoothly.
Replace the remote battery first. If range improves, that was it. If the remote still only works from a few feet away or works intermittently, the receiver board is likely corroded or the antenna is damaged. We test receiver sensitivity with a known-good remote and replace the receiver module if needed. It’s a common issue with Coppell humidity and takes about an hour to fix on most Ghost Controls units.
Usually yes, if the keypad outputs a standard dry-contact signal. We’ve integrated existing LiftMaster and Mighty Mule keypads with new Ghost Controls TSS1 and AXDP openers many times. The key is matching the signal type and wiring it into the Ghost Controls board correctly. We check compatibility on site before any work begins.
Book Your Ghost Controls Service in Coppell, TX
Call (903) 829-4499 and a live person answers, day or night. We’ll schedule your Ghost Controls repair for a specific window and show up. Hal Gatewood’s name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is on every job. Free estimates, upfront pricing, and no trip charge inside the county.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coppell since 2001.