Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Coppell?
Installing a new gate access control system in Coppell typically costs between $650 and $2,800, depending on whether you are adding a simple keypad or integrating a full smartphone-based video entry system. For most residential properties in our area, a standard keypad and intercom setup usually lands between $850 and $1,400, including professional installation and wiring.
At Gatewood Fence & Gate, we’ve been working on gates in North Texas since 2001. We know that Coppell homeowners aren’t looking for a “one-size-fits-all” box from a big-box store. You need a system that handles our specific weather-like the intense heat that fries cheap circuit boards or the occasional heavy rain that finds every weak spot in a poorly sealed box. My name is Hal Gatewood, and when I talk about access control, I’m talking about what works on your driveway, not what looks good in a catalog.
Gate Access Control Cost Breakdown (2026)
The price of access control isn’t just about the hardware; it’s about the labor and the specific integration requirements for your gate type. Below are the typical ranges we see in the Coppell market for 2026. These numbers include the necessary hardware and the labor to get it running properly.
| System Type | Estimated Cost (Installed) |
|---|---|
| Standard Wired Keypad | $650 - $950 |
| Wireless Keypad & Receiver | $450 - $750 |
| Video Intercom System (Smartphone Integrated) | $1,200 - $2,200 |
| Telephone Entry System (Cellular/Landline) | $1,500 - $2,800 |
| Magnetic Lock / Exit Sensor Add-on | $400 - $800 |
If you see a quote that looks significantly cheaper than these ranges, I’d be wary. In my 29 years of doing this, I’ve seen plenty of “bargain” systems that required a full replacement within 18 months because they weren’t rated for outdoor use or the installer skipped the proper surge protection. A gate is only as secure as the weakest link in its wiring. If you want a second opinion on a quote you’ve already received, call us at (903) 829-4499. We offer free second opinions because I’d rather you get it done right the first time than have to fix a mess later.
What Affects Gate Access Control Pricing in Coppell
When I come out to a site in Coppell, I look at a few specific things that dictate the final price. It isn’t just the gadget on the post; it’s how that gadget talks to the gate motor and how we get power to it.
- Trenching and Wiring Distance: If your gate is 100 feet from the house, we have to trench that distance to run low-voltage wire. The longer the run, the higher the labor cost, as we have to protect that wire from the shifting clay soil we see around Coppell.
- Existing Power Supply: If your current gate motor doesn’t have a dedicated power source for an accessory, we have to install one. Adding a transformer or a dedicated outlet adds time and materials to the job.
- Connectivity Requirements: A basic keypad is straightforward. A video intercom that requires a strong Wi-Fi signal at the gate often needs a range extender or a cellular bridge. If your Wi-Fi signal doesn’t reach the street, we have to build that infrastructure first.
- Gate Material and Mounting: Mounting a keypad on a sturdy masonry column is different than mounting it on a hollow metal post. We sometimes have to fabricate custom brackets to make sure the unit is secure and won’t wobble every time someone types a code.
- System Compatibility: If you already have a LiftMaster or DoorKing operator, we want to use accessories that communicate natively with that board. Mixing and matching off-brand parts often leads to glitches, so we stick to the nine major brands we know inside and out, including Viking, FAAC, and BFT.
How to Save on Gate Access Control
You don’t need the most expensive system to have a secure gate. Often, homeowners overspend on features they don’t actually use. Here is how we keep costs reasonable for our neighbors:
- Stick to What You Need: If you don’t need a video feed, don’t pay for it. A high-quality, durable keypad is often all you need to keep your property secure.
- Bundle with Maintenance: If we are already out there performing a gate repair or adjusting your hinges, the labor cost for adding an access control unit is lower because our crew is already on-site.
- Use Our Standing Offers: We keep things simple. If your repair or install exceeds $200, we take $40 off the bill. We also have a permanent 10% discount for our seniors and veterans.
- Get the Right Advice: Don’t buy a system online and hope it works. Call us at (903) 829-4499 before you spend your money. I can tell you over the phone if a specific unit is compatible with your gate or if it’s destined to fail in our Texas heat.
Remember, we offer a free second opinion on any written estimate. If another company told you that you need a $3,000 system, let me take a look at it. There’s a good chance we can get you sorted for less, or at least explain why they quoted you that way.
Safety First: High-Tension Components
I have to say this because I see too many DIY attempts go wrong: gate systems involve high-voltage power and, in some cases, high-tension springs or heavy moving parts that can cause serious injury. Never try to open the housing of your gate motor or mess with the internal wiring if you aren’t trained for it. A gate operator is a machine, and it can move with enough force to crush or pinch. If your gate is acting up, please call a professional. We are insured and bonded, and we know how to handle the dangerous parts so you don’t have to.
FAQs - Gate Access Control Cost
Can I install a smart gate opener myself to save money?
You can buy the hardware, but I strongly advise against DIY installation for gate access control. These systems require precise low-voltage wiring and integration with your existing gate operator board; one wrong connection can fry your main control board, which costs significantly more to replace than the labor you would have saved.
How much does it cost to fix a broken keypad?
Most keypad repairs or replacements in Coppell run between $250 and $500, depending on whether we can fix the wiring connection or if the unit itself has failed due to moisture or age. Call (903) 829-4499 and we can usually diagnose the issue over the phone.
Is it cheaper to repair my old gate opener or upgrade to a new access system?
If your current opener is over 15 years old, it is almost always more cost-effective to upgrade to a modern system. Older units often lack the safety sensors required by current codes, and parts for legacy models are becoming harder to find. Call us for an honest assessment-if it can be fixed, I’ll tell you.
Do you charge a trip fee to come out to Coppell?
No, we do not charge a trip fee for service calls inside the county. We are locally owned and operated, and we keep our service area focused so we can get to you without nickel-and-diming you for travel time.
What if I want a video camera integrated into my gate?
Adding a video intercom typically adds $400 to $800 to the base price of an access control installation. This includes the camera unit and the necessary network bridge to ensure the video stream reaches your phone reliably. Call (903) 829-4499 to discuss which video systems work best with your current gate setup.
Pricing reflects the Coppell market as of 2026. Gatewood Fence & Gate offers free estimates - call (903) 829-4499. Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Coppell since 2001.
What Our Customers Say
"Welded the hinge back onto our wrought iron gate on site rather than taking it away for a fortnight. Ground it back and painted it and you cannot see the repair."
- Winston Achterberg"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly