Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Flower Mound
A sagging gate in Flower Mound usually means the hinge post has moved, not the panel. Clay soil shrinks, the post tips, and the gate drags. We fix it where it fails. Hal Gatewood has been repairing gates since 2001, and he’ll tell you the same thing: fix the post, not the patch. We answer live at (903) 829-4499, 24 hours a day. When your gate won’t close and the HOA is about to send a violation letter, you don’t need a call center three states away. You need someone who knows what Flower Mound clay does to an ornamental iron gate in August.
Why Gatewood Fence & Gate Is Flower Mound’s Preferred Gate Repair Company
Hal Gatewood’s name is on the shop and on every invoice. That’s the oldest accountability there is. We’ve spent years working the master-planned subdivisions that define Flower Mound: Wellington, Bridlewood, The Villages, Tour 18, and the custom-acreage pockets along Cross Timbers Road. Those neighborhoods share a problem. Gates installed in the late 1990s and early 2000s are reaching the end of their service life all at once, and the clay beneath them doesn’t hold still.
Homeowners call us after a national outfit quoted one price on the phone and charged another at the door. That doesn’t happen here. We quote a price in writing before work starts, and we stand behind the job for 90 days. If it’s not done right, Hal comes back. No runaround. Every call is answered by a live person, not a voicemail or a chatbot. When you call about a gate dragging on the concrete at 7 a.m., you get a human who knows what a Viking operator sounds like when the force setting is tripping.
Our Gate Repair Services in Flower Mound
Gate Realignment
Flower Mound’s Denton County black clay is the culprit behind most realignment calls we take. A gate installed level in April can drag by late July because the soil under the hinge post has shrunk a quarter inch. We don’t just lift the gate and tighten a hinge. We find where the post moved, reset it if needed, and set the gate so it stays plumb through the next drought cycle. Homeowners in neighborhoods like Forest Park and Canyon Falls deal with this every summer, and the fix is the same: correct the post, not the panel.

Hinge & Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Welded barrel hinges on ornamental iron gates fail at the weld point after 20 years of Denton County heat and clay movement. We repair them on site with our Gate Parts & Welding in Flower Mound, working in your driveway so the gate never leaves your property. In Flower Mound’s custom-home subdivisions along Morriss Road and Wichita Trail, we regularly find hinge welds cracked through from seasonal post movement. If the post itself is out of plumb, we reset the footing and remount the hardware. Fix the panel without the post and you’ll fix it twice.

Electric Gate Repair
Most Flower Mound driveway gates run on Flower Mound Gate Motor & Opener systems: commercial-grade swing or slide operators from Viking, Elite, and LiftMaster CSW. These units are built for heavy ornamental iron, but they fail too. Stripped rack teeth on slide gates, burned-out capacitors on swing operators, photocells knocked out of alignment by a shifting post. We diagnose on the spot, tell you what’s actually wrong, and only replace the part that needs replacing. Repair first. Always. We service operators from DoorKing and Ghost Controls just as often as Viking and Elite. If your gate opens halfway and reverses, that’s a force-setting or photocell issue, not a reason to buy a new operator.

Automatic Gate Repair
When an automatic gate fails in Flower Mound, it’s usually a Gate Access Control in Flower Mound issue: a mechanical limit switch, a stripped gear, or a control board that got cooked in a metal box facing west. Winter ice storms crack exposed circuit boards on panels that were mounted without proper weatherproofing, leaving the gate frozen in place. We carry replacement boards for the brands we service and can usually have a gate running the same day we diagnose it. In shared driveway situations, which are common in Flower Mound’s entry-gated communities, we coordinate the work so both homeowners keep access while we’re on site.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Around Flower Mound we see a lot of Viking and Elite operators on the heavy ornate gates built in the 1990s, plus Ghost Controls and DoorKing on newer installations. We stock common replacement parts for these systems locally, so a repair in Flower Mound doesn’t wait on a slow-ground shipment. We bring what we think we’ll need, and we verify the diagnosis before we quote anything.
Common Gate Repair Problems We See in Flower Mound Homes
- Summer post shift from clay shrinkage. Denton County black clay pulls hinge posts out of plumb during 100°F stretches. The gate drags, trips the operator’s force setting, and reverses halfway. We reset the post and realign the gate so it works through the drought cycle.
- HOA covenant pressure on a failing gate. Flower Mound architectural review committees actively issue violation notices for misaligned or cosmetically damaged gates. A slow mechanical drift becomes a compliance emergency, and we can usually correct it before the next inspection.
- Shared driveway slide gate failures. Rack and pinion teeth strip or rollers seize, and the gate stops mid-travel. Repairs are delayed because coordinating access with a neighbor and the HOA adds time. We plan the work around both households.
- Winter ice storm control board failures. An unprotected circuit board in a metal control box freezes, cracks, and shorts. Gates fail in the cold when you need them most. We bypass the keypad, replace the board if needed, and weatherproof the enclosure so it survives the next storm.
Pricing for Gate Repair in Flower Mound, TX
You get the price before we start work. No surprises at the door. A typical hinge weld repair in Flower Mound runs $150-$350 depending on how many hinges have cracked. Gate realignment with post adjustment runs $250-$600. Electric gate diagnosis and common repairs like a capacitor, limit switch, or photocell replacement run $180-$450. A full operator replacement on a Viking or Elite swing gate typically lands between $1,200 and $3,800 depending on the unit and the site work needed. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10 percent discount for seniors and veterans. Call (903) 829-4499 for a quote. It’s free, and it’s in writing.
Information-Gain: Why Flower Mound Gates Fail Differently
Most Gate Repair guides ignore what makes Flower Mound different. Here it is. Your clay soil, your HOA covenants, and your housing stock all combine to create failures a generic guide never covers. Denton County’s expansive black clay shrinks aggressively during Flower Mound’s hot, dry summers and heaves back when fall and winter rains return. That seasonal movement shifts gate posts out of plumb and puts constant strain on hinges, rollers, and drive mechanisms. Gates installed level in spring are visibly sagging or dragging by late summer from clay shrinkage alone.
Then the HOA gets involved. Flower Mound’s master-planned communities enforce architectural covenants that classify a sagging or misaligned gate as a covenant violation. In unincorporated Denton County or neighboring Lewisville, a slow sag is a nuisance. In Flower Mound, it’s a letter from the architectural review committee. That’s the compliance emergency you don’t read about in a national gate repair article. And because the town’s gate stock dates heavily from the 1990s and early 2000s build-out era, thousands of ornamental iron driveway gates are now 15 to 25 years old and hitting end-of-life mechanical failures within the same decade. We saw this at a shared driveway in the Wellington of Flower Mound subdivision where a failed Viking gate operator had to stay operational for both homeowners during the entire job. The clay had shifted the hinge post out of plumb, so we reset the post footing, remounted the operator, and realigned the safety photocells before the HOA’s next drive-by inspection. That’s what gate repair in Flower Mound actually looks like.
We Also Serve Cities Near Flower Mound
Our Gate Repair in Flower Mound coverage extends to the communities around it. We work in Southlake, Argyle, Grapevine, and Coppell. If you’re on the edge of Flower Mound near Grapevine Lake or just across the border into Southlake, call and we’ll tell you straight whether we can route a crew to you this week.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Flower Mound
Your gate sags because the hinge post moves, and the post moves because Denton County black clay shrinks in the heat. A repair that only adjusts the gate or tightens the hinge doesn’t address the post footing. We reset the post or reinforce the footing so the gate stays plumb through the next drought cycle. Call (903) 829-4499 and we’ll check the post first.
Yes. We match the repair to the existing material and finish: same steel profile, same ornamental design, same color. We don’t swap in a generic replacement panel or a mismatched post cap. Flower Mound HOAs require community-approved aesthetics, and we’ve done enough work in Wellington, Bridlewood, and the Villages to know what passes review. Call (903) 829-4499 and tell us your subdivision. We’ll explain what we can do within covenant rules.
The most common cause is a stripped rack and pinion tooth or a seized roller, often aggravated by clay movement shifting the track. Shared driveway slide gates add another layer: both households need access while the gate is down. We coordinate the repair around both properties and usually have the gate moving again the same day. Call (903) 829-4499 with your gate’s brand and we’ll bring what we need.
We answer live, 24/7, and we route crews to Flower Mound as soon as roads are safe. During ice storms in Denton County, gates fail when a circuit board cracks in an unweatherproofed control box. We can bypass the keypad entry, get the gate moving manually if needed, and replace the board once we confirm the diagnosis. Call (903) 829-4499 and a live person picks up.
For most repairs, no permit is required if you’re not changing the gate’s footprint or replacing the entire system. A hinge weld, post reset, operator swap, or realignment is typically maintenance work. However, Flower Mound’s HOA covenants may require architectural committee approval for any visible change to the gate’s material or appearance. We can advise you before any work starts. Call (903) 829-4499 and we’ll walk you through what your specific subdivision requires.
Call Gatewood Fence & Gate for Gate Repair in Flower Mound
A gate that won’t close isn’t an inconvenience. It’s an open driveway in a town where the HOA notices. Call (903) 829-4499 and you’ll reach a live person, any hour. We’ll quote a price before work starts, in writing, and every job carries the 90-Day Done Right Promise. Hal Gatewood has been fixing gates since 2001, and he’s not passing through. The name is on the shop. The shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Flower Mound with gate repair, welding, and automation service since 2001.





Before
After
Before
After
Before
After