Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Bedford
Gate repair in Bedford usually comes down to one of three things: a post that has shifted in the clay, a hinge that has finally given out, or an operator from the 1990s that has decided it’s done. Most jobs run $140 to $480, and we can typically be in your driveway the same day you call. Hal Gatewood has been fixing gates since 2001, and he will tell you straight what needs fixing and what doesn’t. Call (903) 829-4499 and a live person answers, any hour.
Key takeaways:
- Most Bedford gate failures trace back to clay soil movement under the posts, not the hardware itself.
- Same-day service is usually available for repair calls in Bedford.
- Every job carries the 90-Day Done Right Promise in writing.
- The price is quoted and agreed before any work starts. No surprise invoices.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Repair Company
We have been fixing gates around Bedford long enough to know which neighborhoods have cedar gates hung on 4×4 posts set in shallow concrete, and which ones have steel frames on proper footings. That matters because the fix is different for each. Hal Gatewood’s name is on the shop and on every invoice. You can drive to the shop and look him in the eye if you want. That’s the oldest accountability there is.
Bedford homeowners call us because we repair what other companies want to replace. We weld on site, in your driveway, so your gate doesn’t leave the property. Our calls are answered by a live person 24/7, not a voicemail and not a call center three states away. And every job, from a hinge replacement to a full operator retrofit, carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back.
We are locally owned and owner-operated, with a published address and license number anyone can look up. Hal has been at this since 2001, and his crew is background-checked and uniformed on every job. We’d rather earn your neighbor’s referral than run a single flashy ad.
Our Gate Repair Services in Bedford
Electric Gate Repair
Older Bedford homes often have original electric gate operators from the 1990s. Control boards burn out in the heat, remote range fades, and the gate stops mid-cycle. We service LiftMaster, DoorKing, Elite, FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule. If the board is obsolete, Hal will tell you honestly whether a retrofit makes sense or whether a new operator is the cheaper long-term answer.
Automatic Gate Repair
An automatic gate that won’t open or won’t close is usually a sensor issue, a gear rack worn smooth, or a safety edge that’s no longer talking to the board. In Bedford’s 105-degree summers, capacitors and relays fail faster than most people expect. We diagnose the actual problem rather than swapping parts that don’t need swapping. Show us the gate closing on its own and we will show you where it’s failing.
Hinge & Post Repair
This is the defining repair job in Bedford. North Texas’s Blackland Prairie clay shrinks in dry summers and swells in wet winters, and that movement heaves gate posts out of plumb. A gate sags in the hinge post, not in the middle, and that is where we start. Fix the panel without the post and you will fix it twice. We reset posts in deep proper concrete, rehang the gate, and realign the hardware so it stays true.
Gate Realignment
When a gate drags on the ground or won’t latch, the hinge post has almost certainly rotated or risen over the years. We re-plumb the post, re-square the gate, and adjust the hinges and latch until it closes like it should. This is especially common along Pipeline Road and Brown Trail, where gates were often set with 4×4 posts in shallow concrete poured directly into clay. Thirty years later, almost every one of them has moved.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We are certified to service nine major gate brands, and we keep common parts stocked locally so Bedford customers aren’t waiting a week for a control board to ship. DoorKing and LiftMaster operators show up regularly in Bedford’s older neighborhoods, and we carry the retrofit kits and receivers that keep them running. We also work on Mighty Mule, Elite, FAAC, BFT, Linear, Viking, and Ghost Controls. If your opener is from the 1990s and still limping along, we will tell you straight whether it’s worth saving.
Common Gate Repair Problems We See in Bedford Homes
- Posts that have heaved out of the clay. Bedford’s expansive soil pushes posts up in wet winters and lets them sink in dry summers. The gate goes out of plumb, and suddenly the latch won’t line up no matter how many times you adjust it.
- Obsolete operator boards and worn gear racks. Original LiftMaster and FAAC units from the 1990s are past their service life. The boards are no longer made, and the gear racks have been worn smooth by 30 years of Texas sun and heat.
- Cedar gates cracked and split past repair. Decades of 105-degree summers dry cedar boards until they crack, and ice storms like February 2021 snap weakened hinges and latch mechanisms outright. Sometimes the honest answer is full replacement, not another patch.
- Safety edges and sensors that stopped talking. Older automatic gates in Bedford were often installed before modern safety requirements existed. The sensors fail, the gate reverses for no reason, or worse, it keeps closing on someone. We can retrofit current safety gear onto older operators.
Pricing for Gate Repair in Bedford, TX
Here are the ranges we see most often in Bedford, so you know what to expect before you call. A hinge replacement on a cedar gate typically runs $140 to $240. Resetting a single gate post in new concrete runs $250 to $450, depending on depth and whether we’re working around existing concrete. A gate realignment that includes re-plumbing the post and rehanging the panel usually runs $280 to $480. Operator repairs range from $160 for a limit-switch fix up to $600 or more if the control board and gear rack both need replacement. Full automatic gate replacement, when the old one is past saving, runs $1,800 to $3,500 installed.
You will know the price before we start. Always. That’s a promise, not a footnote. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 and we will give you a straight number over the phone.
We Also Serve Cities Near Bedford
Our Gate Repair crew works throughout the Mid-Cities. If you’re in Colleyville, Euless, Hurst, or North Richland Hills, we can be there the same way we get to Bedford: fast, on time, and with the tools on the truck. We schedule Bedford jobs alongside these neighboring cities every week, so the route is familiar and the drive is short.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Bedford
The problem is almost never the hinges. It’s the post. Bedford sits on Blackland Prairie clay that shrinks and swells with the seasons, and your gate post was likely set in shallow concrete decades ago. The post moves, the gate sags, and tightening the hinges just masks the real issue. We dig out the post, set it deep in proper concrete, and rehang the gate so it stays plumb through wet winters and dry summers. Call (903) 829-4499 and we will look at it for free.
Sometimes yes. If the motor and gear assembly are still sound, we can install a new receiver, upgrade the control board to a modern equivalent, and add current safety sensors. But if the gear rack is worn and the board is obsolete, you may be looking at a new operator. Hal will show you the actual condition before you spend anything. We work on LiftMaster, DoorKing, Elite, FAAC, and most other major brands, and we can usually give you a retrofit quote the same day.
Most of the time, a cedar gate in Bedford can be re-hung if the wood structure is still sound. We reset the posts, replace the hinges, and realign the latch. But if the boards are cracked through, the frame is rotting, or the ice storms have split the rails, then a new gate is the honest answer. We build and install replacements that match the 1970s to 1990s ranch style common in Bedford neighborhoods. Bring us a photo and we will tell you straight whether it’s repairable.
Yes. Many automatic gates in Bedford were hung before modern safety requirements existed, which means no photo eyes, no reversing edges, and no force limitation. We install current safety sensors, safety edges, and proper force settings on existing operators so the gate meets today’s standards. If your gate closes on a person or a car, that’s a serious safety issue, and we treat it as one. Call us and we will come assess it.
In most cases, yes. The ice storm didn’t bend the post; it exploited a footing that was already failing. We dig out the old concrete, set a new post or re-set the original one in a deeper footing, and rehang the gate. If the post itself is cracked or rusted through, we replace it entirely. The gate stays in your driveway while we work. Call (903) 829-4499 for a free assessment.
How Bedford’s Clay Soil Changes Gate Repair
Bedford is a fully built-out, landlocked suburb where the dominant housing wave ran from the mid-1970s through the early 1990s. That means a huge share of original cedar privacy gates are now 30 to 50 years old and failing at the same time. Combine that with North Texas’s shrink-swell clay, and you get a specific pattern: posts heave in wet winters, sink in dry summers, and gates go out of plumb year after year. This isn’t a hardware problem. It’s a soil problem.
We rolled out to a 1980s HOA neighborhood off Brown Trail for a swing gate that wouldn’t latch. The homeowner assumed a new latch would fix it, but our tech found the hinge post had risen nearly an inch out of its shallow clay-set footing, throwing the whole gate out of plumb. After re-plumbing the post and resetting it in a proper deep concrete footing, we rehung the original gate and realigned the latch. No new hardware needed, just sag correction done right.
This is why post-reset and hinge realignment are the defining repair jobs in Bedford, not simple hardware swaps. Anyone can bolt on a new latch. It takes knowing the soil and the housing stock to fix the thing that actually moved.
Contact Gatewood Fence & Gate in Bedford
If your gate is sagging, sticking, or refusing to open, call us before it gets worse. A live person answers at (903) 829-4499, 24 hours a day, seven days a week. We will give you a straight quote over the phone, and the price we agree on is the price you pay. No trip charge inside the county. $40 off any repair over $200. Free second opinions on any written estimate. A permanent 10% discount for seniors and veterans. And every job, big or small, carries the 90-Day Done Right Promise in writing. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford and the Mid-Cities since 2001.