Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Euless
Gate parts and welding in Euless usually comes down to one of three jobs: a gate post that the Blackland Prairie clay has shoved out of plumb, a 1970s or 80s operator board that is no longer made, or a commercial slide gate on the SH-183 corridor that has eaten through its chain and rollers again. We handle all three, usually same-day for residential calls in Euless, and we do the welding in your driveway instead of hauling the gate off to a shop. Call (903) 829-4499 and Hal Gatewood will answer or call you right back.
Hal has run Gatewood Fence & Gate since 2001, and our Gate Parts & Welding work across Euless skews older than most towns. The housing stock here was mostly built between the late 1960s and the mid-1990s, and a lot of those gates are still swinging on original hinges and original posts. On the commercial side, the airport corridor runs gates around the clock. We know both ends of that spectrum.
Why Gatewood Fence & Gate Is Euless’s Preferred Gate Parts & Welding Company
We are not a national brand with a call center. Hal Gatewood’s name is on the shop, the shop has a published address, and the person who shows up at your Euless house is the same person you can find at the hardware store. That matters in a city like Euless, where a gate that will not latch is not a cosmetic problem. It is a security problem, and you want someone who treats it that way.
Every job we do carries the 90-Day Done Right Promise in writing. If it is not done right, one call brings Hal back. No runaround, no fine print. Our crews are background-checked and uniformed, and a live person answers the phone 24/7. Not a voicemail, not a dispatch queue three states away. Call (903) 829-4499 at 2 a.m. and you will get a human.
We also know Euless specifically. We know the older subdivisions off Harwood Road and Fuller-Wiser Road where ornamental iron gates from the 70s and 80s are common. We know the apartment complexes off SH-10 and along Airport Freeway that still run original Linear and LiftMaster slide operators. And we know what the wet-dry clay cycles do to gate posts here, because we see it every spring and every fall.
Our Gate Parts & Welding Services in Euless
Hinge Replacement
A sagging gate in Euless is rarely a sagging gate. It is a gate whose hinges have worn egg-shaped, or whose post has moved. We replace hinges with heavier barrel hinges or adjustable weld-on hinges, and we check the post before we hang the gate back on it. Fix the panel without checking the post and you will fix it twice. A typical hinge replacement in Euless runs $120 to $280 per pair, depending on iron weight and whether we are welding or bolting.
Post Replacement
The expansive clay under Euless swells when it rains and shrinks when it dries. That cycle heaves gate posts out of plumb on a near-annual basis, and it is the single most common repeat call we get here. A gate that drags or will not latch is usually a post problem, not a hardware problem. We dig out the old footing, set the new post in a deeper concrete pour, and weld the hinge plates back on square. Post replacement in Euless typically runs $350 to $700 per post, including concrete and finish work.
Rail Repair
Slide gates on apartment and commercial properties need their rail and rack-and-pinion hardware intact, or the operator burns itself out trying to move a gate that is fighting back. We straighten bent rail, replace worn rack sections, and weld cracked rail joints back to true. On the airport-corridor facilities where gates cycle hundreds of times a day, rail repair is cheaper than operator replacement, and it is the first thing we check when a slide gate starts laboring. Rail repair in Euless runs $200 to $600 depending on how much rail has to be replaced.
Custom Welding
Older ornamental iron gates in Euless were often built with thinner wall tubing than what we use today, and 40 years of North Texas sun and freeze-thaw cycles has taken a toll. We weld cracked pickets, rebuild rusted bottom rails, fabricate replacement frame sections, and reinforce stress points where the original builder skimped. If the gate is salvageable, we salvage it. That is the repair-first philosophy Hal has run this shop on since 2001. Custom welding on a residential iron gate in Euless typically runs $180 to $450, depending on the extent of the repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Euless
We are certified to service nine major gate operator brands, and we carry parts for the ones Euless actually runs: Linear, LiftMaster, Viking, Ghost Controls, BFT, and the rest. The older Linear slide operators on 1980s apartment complexes are a particular specialty, because their control boards are increasingly discontinued and the answer is usually a full operator retrofit rather than a board swap. We will tell you which one you need, and we will not sell you a replacement when a $40 part fixes the problem. Call (903) 829-4499 and we will tell you straight.
Common Gate Parts & Welding Problems We See in Euless Homes
- Post heaving from the clay. The Blackland Prairie soil under Euless swells and shrinks with every rain-dry cycle, and posts move. Your gate hardware is likely fine. The post is not. We reset the footing and square the gate back up.
- Obsolete operator boards on older complexes. Those 1970s and 80s Linear and LiftMaster slide operators along Euless’s apartment corridors are running on boards that are no longer manufactured. When they die, a board swap is usually off the table, and the smart fix is a current LiftMaster or Viking retrofit.
- Worn rack-and-pinion and drive chains on SH-183 commercial gates. The airport-corridor freight and hotel gates cycle 24/7 and burn through wear parts in months, not years. We keep chain, rack, and roller stock on hand for exactly this.
- UV-cracked operator housings and heat-binding steel. North Texas summers top 105°F, and steel gates expand enough to bind in their tracks. Plastic operator housings crack under the UV. We replace housings, adjust track clearance, and set operators up so they do not fight the heat.
Pricing for Gate Parts & Welding in Euless, TX
Here are honest numbers for Euless. Hinge replacement runs $120 to $280 per pair. Post replacement, including the concrete footing, runs $350 to $700 per post. Rail and rack repair runs $200 to $600. Custom welding on a residential iron gate runs $180 to $450. Full gate operator replacement for an apartment or commercial slide gate in Euless typically runs $1,800 to $4,200, depending on gate length and whether we are integrating Gate Access Control in Euless, loop detectors, and photo-eyes at the same time.
What changes the price: the gate’s weight, the post’s condition once we dig it up, and whether the hardware can be welded in place or has to be fabricated. We quote the price before any work starts, and that price does not change at the door. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (903) 829-4499 for a free estimate.
Why Euless Gate Repair Is Different
Euless sits directly against the eastern boundary of DFW International Airport, and the SH-183 corridor running through the city is packed with extended-stay hotels, logistics warehouses, and air-cargo support facilities. Those facilities run slide gates around the clock, and a gate that cycles 400 times a day in Euless wears through drive chains and roller assemblies at a rate most residential gates will not hit in a decade. That means Gate Parts & Welding work in Euless skews heavily toward commercial Euless Gate Motor & Opener replacement, rack repair, and access-control integration rather than the residential swing-gate work that dominates nearby cities.
We got called to a 1970s-era apartment complex off Harwood Road where the original Linear slide gate operator had finally died. The gate’s hinge post had been heaved out of plumb by the clay, the drive chain was stretched past spec, and the safety photocells were original and non-functional. We reset the post footing with a deeper concrete pour, replaced the obsolete control board with a current LiftMaster unit, replaced the worn rack and pinion, and got the loop detector and photo-eyes working again so the gate could pass a UL 325 entrapment check. That is a normal job in Euless. It is not normal anywhere else in the metro.
The February 2021 winter storm exposed another Euless-specific problem: the 24/7 gate operators along SH-183 were never winterized. Ice built up on tracks, power-surge restarts snapped drive chains, and control boards fried across the airport corridor. Local parts stock for Linear and LiftMaster boards cleaned out in days. We have since kept a deeper inventory of exactly those boards, because Euless is where the demand hits first.
We Also Serve Cities Near Euless
Our Gate Parts & Welding in Euless team also runs calls to Bedford, Colleyville, Grapevine, and Hurst. If you are in one of those cities, same service, same pricing, same 90-Day Done Right Promise. Call (903) 829-4499 and we will get you on the schedule.
Serving Euless, TX - Our Local Coverage Area
We’re based in the Euless area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Euless
Because the Blackland Prairie clay under your gate posts swells when it rains and shrinks when it dries, and each cycle shifts the post a little further out of plumb. The latch is fine. The post is not. We reset the post footing deeper and square the hinges back up. Call (903) 829-4499 and Hal can tell you over the phone whether it sounds like a post heave or a hinge problem.
If the board is the failure, replacement is usually the only honest answer. Linear stopped making boards for many 1980s slide operators years ago, and sourcing a used one is a gamble. We will check the motor, the gearbox, and the board, and if the unit is worth saving we will save it. If not, we will quote a current LiftMaster or Viking retrofit that fits the existing mount. Estimates are free.
Welding a stretched or fatigued chain is not a fix, because the rest of the links are just as worn as the one that broke. The fix is a new drive chain and usually a new rack section, and we do that in place. If the chain has snapped more than once, the gate is binding somewhere, and we need to check the rail, the rollers, and the operator torque before we put another chain on it. Call (903) 829-4499 for a site visit and a written price.
If the hinge is worn egg-shaped and the post is still plumb, we repair or replace the hinge and you are done. If the gate was latching fine last fall and now will not, the post has almost certainly moved. We check with a level before we touch anything, and we will show you what we find. You will never pay for post work you do not need. Call (903) 829-4499 to schedule a look.
Yes, it was widespread in Euless, especially along the SH-183 airport corridor. The 24/7 operators at hotels and freight facilities were never winterized, and when power surged back on, boards fried and chains snapped. We keep deeper board inventory for Linear and LiftMaster now specifically because Euless got hit hardest. If yours is still down, call (903) 829-4499 and we will tell you whether it is a board swap or a full operator replacement, and what it costs.
Get Your Euless Gate Fixed Today
If your gate is dragging, sagging, not latching, or the operator has quit, call (903) 829-4499 for Gate Installation - Euless or repair. Hal Gatewood answers the phone. We will give you an honest price over the phone, schedule a time that works, and show up when we say we will. The 90-Day Done Right Promise is in writing on every job, and the name on the invoice is the same name on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Euless since 2001.