Gate Parts & Welding in Colleyville - Made to Measure, Written Price

Fast, Reliable Gate Parts & Welding Across Colleyville

Gate parts and welding in Colleyville usually comes down to one thing: a heavy ornamental driveway gate that has been settling in North Texas black clay for twenty years, and a hinge post that is no longer plumb. That’s the job we do most often here, and we do it on-site so your gate never leaves your driveway. Hal Gatewood has been welding and repairing gates since 2001, and our crew works Colleyville neighborhoods every week. Call (903) 829-4499 and a live person answers, any hour, any day.

Call (903) 829-4499

Colleyville is different from the newer subdivisions around it. Most of these homes went up between 1995 and 2010, and nearly every one of them got an ornamental iron driveway gate. Those gates are now 15 to 25 years old. The operators are tired, the steel has stress fatigue, and the posts have shifted. We know exactly what we’re walking up to before we even park the truck.

Why Gatewood Fence & Gate Is Colleyville’s Preferred Gate Parts & Welding Company

We’re not a national chain with a rotating cast of strangers. Hal Gatewood’s name is on the shop. His address is published. His license number is there for anyone to look up. When you call about gate welding in Colleyville, you’ll get him or one of his crew, and you’ll see the same face at the hardware store next month.

Every job we do in Colleyville carries the 90-Day Done Right Promise, in writing. Not a verbal shrug. If the weld fails or the part doesn’t hold, one call brings us back. No runaround, no service-fee games.

We answer the phone with a live person 24/7. Not a voicemail, not an automated tree, not a call center three states away. You call, a human picks up, and we’ll get someone to Colleyville the same day for most repair work.

Our standing offers apply to every Colleyville job: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. We quote the price before we start, and that’s the price you pay.

Key Takeaways

• On-site welding means your Colleyville gate stays in your driveway, not hauled to a shop.
• We repair first and replace only what actually needs replacing.
• Every job is backed by the 90-Day Done Right Promise in writing.
• Free estimates, upfront pricing, and a live person on the phone around the clock.
• Years of experience with the exact gate brands common across Colleyville estates.

Our Gate Parts & Welding Services in Colleyville

Hinge Replacement

Hinge work in Colleyville is rarely a simple swap. The heavy ornamental swing gates common on Bransford Road and off Glade Road estates put serious torsional load on hinge brackets, and when the post has shifted even a degree or two, the whole assembly starts fighting itself. We cut out the old bracket, assess the post, and weld in a new hinge with the gate properly aligned. If the post is the culprit, we address that too, not just the hardware bolted to it.

Post Replacement

A gate sags in the hinge post, not in the middle. That’s where we start in Colleyville, because the black gumbo soil under these lots expands and contracts enough to lean even a well-set post over time. We dig out the old footing, set a new post in a deeper concrete pad, and re-plumb it before the gate goes back on. Skipping the post and just adjusting the gate means you’ll call us again in six months.

Rail Repair

Cantilever slide gates are common on the wider driveways across Colleyville’s half-acre to acre-plus lots. The top and bottom rails on these gates carry the entire load, and when a heavy spring limb from a post oak drops onto the rail, it bends. We straighten what’s salvageable and replace what isn’t, then burnish the V-track rollers so the gate moves cleanly again. This is a bigger issue in Colleyville than in Southlake or Keller because the mature tree canopy is denser here.

Custom Welding

This is where we spend a lot of our time on Colleyville estates. Matching original scrollwork, rebuilding a rusted-through bottom rail, fabricating a new hinge bracket to match the existing ironwork. Hal welds on site, which means your gate is never loaded onto a trailer. The repair is burned into the existing steel, not bolted over it. If it was hand-forged in the 90s, we can replicate the look closely enough that you won’t spot the difference from ten feet away.

Our Gate Parts & Welding work is the same whether it’s a simple latch repair or a full post re-set: done right, done on site, and done by someone whose name you can find on the shop door.

Trusted Brands We Service in Colleyville

We’re certified to service nine major gate brands, and in Colleyville the ones we see most are Elite, LiftMaster, and Linear operators from that 1995 to 2010 building wave. We also service BFT and Viking units on a growing number of our Gate Motor & Opener in Colleyville installs. When an original Elite operator from 2003 starts grinding under a sagging rail, we don’t just slap in a new board and hope. We trace the mechanical issue to its source, then repair or replace the part with the correct spec. We keep common parts stocked locally for Colleyville calls, which means less waiting on a warehouse shipment when your gate won’t close.

Common Gate Parts & Welding Problems We See in Colleyville Homes

• Post footing shift from black gumbo clay. Colleyville’s shrink-swell soil moves far more than the better-draining lots in neighboring cities. Hinge posts lean, gates sag, and latches miss their receivers. We re-plumb the post and re-set the footing rather than shimming around the problem.
• Storm debris on slide gates. Mature post oaks and cedar elms drop limbs onto cantilever slide tracks every April and May. Bent rails and jammed V-track rollers are a spring surge for us in Colleyville, heavier than what we see in Southlake or Hurst.
• Failing operators from the original build. Elite, LiftMaster, and Linear operators installed 15 to 25 years ago lose capacitor strength and gearbox tolerance. When the gate stalls mid-cycle, it’s usually the operator fighting a gate that’s also out of alignment.
• Latch misalignment on double swing gates. On heavy ornamental double gates, one side drifts over time from soil movement. The latch post and receiver no longer line up, and the gate won’t hold closed. We address the post and the latch as one system, not two separate repairs.

What Makes Colleyville Gate Welding Different

Colleyville isn’t the kind of town where you can copy-paste a gate repair from a newer suburb. The city’s development window was narrow and specific: large custom and semi-custom estates built mostly between 1995 and 2010, on lots from half an acre to well over an acre. Driveway gates here are nearly standard equipment, and they’re heavy. Ornamental wrought iron, 14 to 18 feet wide, swinging on posts set into soil that moves every season. That combination means two things: first, most of the original Elite, LiftMaster, and Linear operators in Colleyville are reaching end-of-life at roughly the same time. Second, the chronic structural issue isn’t the gate itself, it’s the post the gate hangs on. Black gumbo soil under a Colleyville driveway heaves in spring and contracts in late summer, and after twenty years, a hinge post that was set dead plumb is now leaning 1.5 to 2 inches. Show me the gate closing on its own and I’ll show you where it’s failing.

On a private lane off Bransford Road, our crew re-welded the lower hinge bracket on a 16-foot ornamental swing gate where years of black gumbo movement had thrown the hinge post 1.5 inches out of plumb. We cut and replaced the post footing, re-set the hinge post in a deeper concrete pad, and burnished the Elite operator’s rack and pinion before re-hanging the gate to a silent close. That kind of job can’t be done from a catalog or a truck full of generic brackets. It takes someone who welds, who understands soil, and who’s seen enough Colleyville gates to know what twenty years of weather does to one.

The tree canopy adds another layer. Big post oaks and cedar elms line a lot of these driveways, and when a spring storm drops a limb on a cantilever gate, the rail bends or the roller carriage jams. We see that surge every April and May, heavier here than in the more open lots of neighboring Southlake. If you’re reading this in Colleyville with a gate that won’t close, there’s a good chance a limb or the clay under your post is behind it.

Pricing for Gate Parts & Welding in Colleyville, TX

We Also Serve Cities Near Colleyville

While most of our gate parts and welding work keeps us in Colleyville, we regularly cross city lines for customers in Colleyville‘s neighboring communities. Bedford, Euless, Southlake, and Hurst are all within easy reach, and the same upfront pricing, 90-Day Done Right Promise, and on-site welding apply no matter which side of the county line your driveway is on.

FAQs - Gate Parts & Welding in Colleyville